HP Laser CE527A#ABA 13.JJ.NT Paper JAM Open Input, Trays, TOO Complex, EIO X Buffer Overflow

Table 10-1Control-panel messages (continued)

Control panel message	Description	Recommended action
13.JJ.NT PAPER JAM OPEN INPUT	A jam has occurred in a tray.	1.	Open each tray and check for jammed
TRAYS			paper.
alternates with		2.	Open the top cover.
Open all trays		3.	Remove the print cartridge and any
			paper.
		4.	Reinstall the print cartridge and close
			the top cover.
		5.	Close all trays.
21 PAGE TOO COMPLEX	The data in the print job is too complex.	1.	Press the OK button to print the
For help press			transferred data (some data might be
			lost).
alternates with		2.	If this message displays often, simplify
21 PAGE TOO COMPLEX			the print job or install more memory.
To continue press OK
22 EIO X BUFFER OVERFLOW	Too much data was sent to the EIO card in	1.	Press the OK button to clear the
To continue press OK	the specified slot [X]. An improper		message. (The job will not be printed.)
	communications protocol might be in use.	2.	Check the host configuration. If the
	Note: EIO 0 is reserved for the HP Jetdirect		message persists, contact an HP-
	embedded print server.		authorized service or support provider.
22 EMBEDDED I/O BUFFER OVERFLOW	Too much data was sent to the product's	Press the OK button to continue printing.
To continue press OK	internal HP Jetdirect.	Some data might be lost.
22 USB I/O BUFFER OVERFLOW	Too much data was sent to the USB port.	Press the OK button to clear the error
To continue press OK		message. (The job will not be printed.)
40 EIO X BAD TRANSMISSION	The connection has been broken between	Press the OK button to clear the error
To continue press OK	the product and the EIO card in the specified	message and continue printing.
	slot [X].
	Note: EIO 0 is reserved for the HP Jetdirect
	embedded print server.
40 EMBEDDED I/O BAD TRANSMISSION	The connection has been broken between	Press the OK button to clear the error
To continue press OK	the product and HP Jetdirect print server.	message and continue printing.
41.3 UNEXPECTED SIZE IN TRAY 1	You have configured Tray 1 for a different	Reload the tray with the correct paper size.
MANUALLY FEED <TYPE> <SIZE>	size of paper than the print job requires.	If another tray contains the correct size, the
		product prompts you to press the OK button
		to use another tray.

148 Chapter 10 Solve problems ENWW