HP Laser CE527A#ABA Reset Security YES, Diagnostics Embedded Tests, LAN HW Test YES, Execute YES

Item	Sub-item	Sub-item	Values	Description
	RESET SECURITY		YES	Specify whether the current security settings
			NO*	on the print server will be saved or reset to
				factory defaults.
DIAGNOSTICS	EMBEDDED TESTS			This menu provides tests to help diagnose
				network hardware or TCP/IP network
				connection problems.
				Embedded tests help to identify whether a
				network fault is internal or external to the
				product. Use an embedded test to check
				hardware and communication paths on the
				print server. After you select and enable a test
				and set the execution time, you must select
				the EXECUTE option to initiate the test.
				Depending on the execution time, a selected
				test runs continuously until either the product
				is turned off, or an error occurs and a
				diagnostic page is printed.
		LAN HW TEST	YES	CAUTION: Running this embedded test will
			NO*	erase your TCP/IP configuration.
				Perform an internal loopback test, which
				sends and receives packets only on the
				internal network hardware. There are no
				external transmissions on your network.
		HTTP TEST	YES	Check operation of HTTP by retrieving
			NO*	predefined pages from the product, and test
				the embedded Web server.
		SNMP TEST	YES	Check operation of SNMP communications
			NO*	by accessing predefined SNMP objects on
				the product.
		DATA PATH TEST	YES	Identify data path and corruption problems on
			NO*	an HP postscript level 3 emulation product.
				This test sends a predefined PS file to the
				product. However, the test is paperless; the
				file does not print.
		SELECT ALL	YES	Select all available embedded tests.
		TESTS	NO*
		EXECUTION TIME		Specify the length of time (in minutes) that an
		[M]		embedded test will run. You can select a
				value from 0 to 24 minutes. If you select zero
				(0), the test runs indefinitely until an error
				occurs or the product is turned off.
				Data gathered from the HTTP, SNMP, and
				Data Path tests is printed after the tests have
				completed.
		EXECUTE	YES	Select whether to initiate the selected tests.
			NO*

34 Chapter 2 Control panel ENWW