HP Laser CE527A#ABA manual EIO X Disk not Functional, EIO X Disk Spinning UP, EIO Device Failure

Table 10-1Control-panel messages (continued)

Control panel message	Description	Recommended action
EIO <X> DISK NOT FUNCTIONAL	The EIO disk in slot X is not working correctly.	1. Turn the product off.
For help press		2. Make sure the EIO disk is inserted
			correctly and securely fastened.
		3.	If the control panel message continues
			to appear, replace the disk.
EIO <X> DISK SPINNING UP	The disk accessory in EIO slot [X] is	No action is necessary.
alternates with	initializing.
<Current status message>
EIO DEVICE FAILURE	The specified device has failed.	Press the OK button to continue.
To clear press OK
EIO FILE OPERATION FAILED	A command attempted an illogical operation.	Press the OK button to continue.
To clear press OK
EIO FILE SYSTEM IS FULL	The specified file system is full and cannot be	Press the OK button to continue.
To clear press OK	written to.
EIO IS WRITE PROTECTED	The file system cannot be written to.	Press the OK button to continue.
To clear press OK
Event log empty	You are attempting to view an empty event	No action is necessary.
	log by selecting the SHOW EVENT LOG
	option from the control panel.
INCOMPATIBLE BLACK CARTRIDGE	The print cartridge is for another product.	Replace the print cartridge with a print
		cartridge for this product. See Change the
		print cartridge on page 122.
		For information about print cartridges that this
		product supports, see Part numbers
		on page 201.
Incorrect	The wrong PIN number was entered.	Reenter PIN number.
INFLATE FAILURE	An error occurred during a firmware upgrade.	Contact an HP-authorized service or support
SEND RFU UPGRADE ON USB DEV PORT		provider.
Initializing	Individual tasks are being initialized.	No action is necessary.
INSERT OR CLOSE TRAY <X>	The specified tray is open or missing.	Insert or close the tray for printing to continue.
For help press
INSTALL BLACK CARTRIDGE	The print cartridge is missing.	1. Open the top cover.
For help press		2.	Install the cartridge.
		3.	Close the top cover.

ENWW Interpret control-panel messages 155