HP Laser CE527A#ABA manual IPV4 Settings Config Method Bootp, Dhcp, Auto IP, Manual IP Address

Item	Sub-item	Sub-item	Values	Description
	IPV4 SETTINGS	CONFIG METHOD	BOOTP	Specify the method that TCP/IPv4
			DHCP*	parameters are configured on the
				HP Jetdirect print server.
			AUTO IP	BOOTP: Automatic configuration from a
			MANUAL	BootP (Bootstrap Protocol) server.
				DHCP: Automatic configuration from a
				DHCPv4 (Dynamic Host Configuration
				Protocol) server. If selected and a DHCP
				lease exists, the DHCP RELEASE and
				DHCP RENEW menus are available to set
				DHCP lease options.
				AUTO IP: Automatic link-local IPv4
				addressing. An address in the form
				169.254.x.x is assigned automatically.
				MANUAL: Use the MANUAL SETTINGS
				menu to configure TCP/IPv4 parameters.
		MANUAL	IP ADDRESS	(Available only if the CONFIG METHOD
		SETTINGS	SUBNET MASK	menu is set to the MANUAL option)
				Configure parameters directly from the
			DEFAULT	product control panel:
			GATEWAY	IP ADDRESS: The unique IP address
				(n.n.n.n) of the product, where n is a value
				from 0 to 255.
				SUBNET MASK: The subnet mask (n.n.n.n)
				for the product, where n is a value from 0 to
				255.
				DEFAULT GATEWAY: The IP address of the
				gateway or router used for communications
				with other networks.
		DEFAULT IP	AUTO IP*	Specify the IP address to default to when the
			LEGACY	print server is unable to obtain an IP address
				from the network during a forced TCP/IP
				reconfiguration (for example, when manually
				configured to use BootP or DHCP).
				NOTE: This feature assigns a static IP
				address that might interfere with a managed
				network.
				AUTO IP: A link-local IP address 169.254.x.x
				is set.
				LEGACY: The address 192.0.0.192 is set,
				consistent with older HP Jetdirect products.
		DHCP RELEASE	YES	Specify whether to release the current DHCP
			NO*	lease and the leased IP address.
				NOTE: This menu displays if the CONFIG
				METHOD is set to the DHCP option and a
				DHCP lease for the print server exists.

ENWW Configure device menu 31