HP Laser CE527A#ABA manual Wake time, Set the real-time clock, Set the wake time

Wake time

The wake time feature allows you to instruct the product to wake at a certain time on selected days, to eliminate waiting for the warm-up and calibration periods. You must have the SLEEP MODE setting on to set the wake time.

NOTE: Make sure that the real-time clock is set to the correct date and time before you set the wake time.

Set the real-time clock

Use the real-time clock feature to set the date and time settings. The date and time information is attached to stored print jobs, so you can identify the most recent versions.

Access the DATE/TIME menu	1.	Press the Menu button		.
	2.	Open each of the following menus. Press the down arrow					to highlight it and then
		press the OK button to select it.
		a.	CONFIGURE DEVICE
		b.	SYSTEM SETUP
		c.	DATE/TIME
Set the date	1.	From the DATE/TIME menu, highlight and select the DATE menu.
	2.	Use the numeric keypad, or press the up arrow or down arrow					/ to select the year,
		month, and day. Press the OK button after each selection.
Set the date format	1.	From the DATE/TIME menu, highlight and select the DATE FORMAT menu.
	2.	Press the up arrow or down arrow			/	to select the date format, and then press the
		OK button.
Set the time	1.	From the DATE/TIME menu, highlight and select the TIME menu.
	2.	Use the numeric keypad, or press the up arrow or down arrow					/ to select the hour,
		minute, and AM/PM setting. Press the OK button after each selection.
Set the time format	1.	From the DATE/TIME menu, highlight and select the TIME FORMAT menu.
	2.	Press the up arrow or down arrow			/	to select the time format, and then press the
		OK button.

Set the wake time

1.Press the Menu button .

2.Open each of the following menus. Press the down arrow to highlight it and then press the OK button to select it.

a.CONFIGURE DEVICE

b.SYSTEM SETUP

c.WAKE TIME

3.Press the up arrow or down arrow / to select the day of the week, and then press the OK button.

4.Press the down arrow to select the CUSTOM setting, and then press the OK button.

94 Chapter 7 Use product features ENWW