HP Laser CE527A#ABA manual Tray X Type Size, Tray X Open, Unable to Read Entire Directory

Table 10-1Control-panel messages (continued)

Control panel message	Description	Recommended action
Too many trays installed	You have installed more optional trays than	Remove one of the optional trays.
Turn power off and uninstall a tray	the product supports.
	The product can accept up to two optional
	500-sheet trays.
Too many USB accessories	The does not support this many USB storage	Remove the extra USB storage accessories
For help press	accessories.	until this message goes away. Then, remove
		and reinsert the new USB storage accessory.
Too many USB hubs	The product has detected that a USB hub is	Remove the extra USB hub. The product
Remove latest USB hub	connected to another USB hub.	does not support USB hubs connected to
		other USB hubs.
TRAY <X> [TYPE] [SIZE]	This message states the current type and	To change the paper size or type press the
To change size or type press OK	size configuration of the paper tray, and	OK button while the message is present. To
	allows you to change the configuration.	clear the message, press the back arrow
alternates with		while the message is present.
TRAY <X> [TYPE] [SIZE]		● Select the ANY SIZE and ANY TYPE
		settings if the tray is used frequently for
To accept settings press		different sizes or types.
		● Set size and type to a specific setting if
		printing with only one type of paper.
TRAY <X> OPEN	The tray cannot feed paper to the product	Check the trays and close any that are open.
For help press	because tray [X] is open and must be closed
	for printing to continue.
alternates with
<Current status message>
Unable to add more files to print	The print queue has the maximum number of	Wait for a job to finish before adding another
Wait for a job to finish printing	jobs.	job to the print queue.
UNABLE TO READ ENTIRE DIRECTORY	The list of files on the USB accessory is	1. To print a file from the partial list, press
To continue press OK	longer than the product can display.	the OK button and then select a file from
		the list.
		2. To prevent this problem, remove files
		from the USB accessory.
UNABLE TO STORE JOB	The print job named cannot be stored	Correct the error and then try again to store
alternates with	because of a memory, disk, or configuration	the job.
	problem.
<Current status message>
UNSUPPORTED SUPPLY IN USE	The print cartridge is for a different HP	If print quality is no longer acceptable, replace
	product.	the print cartridge. See Change the print
		cartridge on page 122.
		For a list of supported print cartridges, see
		Part numbers on page 201.
UNSUPPORTED SUPPLY INSTALLED	The print cartridge is for a different HP	If print quality is no longer acceptable, replace
	product.	the print cartridge. See Change the print
		cartridge on page 122.
		For a list of supported print cartridges, see
		Part numbers on page 201.

ENWW Interpret control-panel messages 159