HP Laser CE527A#ABA Proxy Server, Proxy Port, Idle Timeout, IPX/SPX Enable, OFF Frame Type Auto

Item	Sub-item	Sub-item	Values	Description
	PROXY SERVER			Specifies the proxy server to be used by
				embedded applications in the product. A
				proxy server is typically used by network
				clients for Internet access. It caches Web
				pages, and provides a degree of Internet
				security, for those clients.
				To specify a proxy server, enter its IPv4
				address or fully-qualified domain name. The
				name can be up to 255 octets.
				For some networks, you might need to
				contact your Internet Service Provider (ISP)
				for the proxy server address.
	PROXY PORT			Type the port number used by the proxy
				server for client support. The port number
				identifies the port reserved for proxy activity
				on your network, and can be a value from 0
				to 65535.
	IDLE TIMEOUT			Configure the time period, in seconds, after
				which an idle TCP print data connection is
				closed (default is 270 seconds, 0 disables the
				timeout).
IPX/SPX	ENABLE		ON*	Enable or disable the IPX/SPX protocol.
			OFF
	FRAME TYPE		AUTO*	Select the frame-type setting for your
			EN_8023	network.
				AUTO: Automatically sets and limits the
			EN_II
				frame type to the first one detected.
			EN_8022	EN_8023, EN_II, EN_8022, and EN_SNAP
			EN_SNAP	are frame-type selections for Ethernet
				networks
APPLETALK	ENABLE		ON*	Configures an AppleTalk network.
			OFF
DLC/LLC	ENABLE		ON*	Enable or disable the DLC/LLC protocol.
			OFF
SECURITY	SECURE WEB		HTTPS REQUIRED*	For configuration management, specify
			HTTPS OPTIONAL	whether the embedded Web server will
				accept communications using HTTPS
				(Secure HTTP) only, or both HTTP and
				HTTPS.
	IPSEC		KEEP	Specify the IPSec status on the print server.
			DISABLE*	KEEP: IPSec status remains the same as
				currently configured.
				DISABLE: IPSec operation on the print
				server is disabled.
	802.1X		RESET	Specify whether to keep the 802.1X settings
			KEEP*	on the print server or to reset them to the
				factory defaults.

ENWW Configure device menu 33