HP Laser CE527A#ABA manual Permanent Storage Full, Permanent Storage Write Fail

Table 10-1Control-panel messages (continued)

Control panel message	Description	Recommended action
58.XX ERROR	A product error has occurred where a	To resolve problems with the power supply:
For help press	memory tag CPU error was detected, or there	1. Remove the product from any UPS
	is a problem with the air sensor or power
alternates with	supply.		supplies, additional power supplies, or
			power strips. Plug the product into a wall
58.XX ERROR			outlet and see if this resolves the
			problem.
To continue turn off then on		2. If the product is already plugged into a
			wall outlet, try another power source in
			the building that is independent of the
			one being used.
		Make sure the line voltage and current source
		meet the electrical specifications for the
		product.
		If the message persists, contact an HP-
		authorized service or support provider.
59.XY ERROR	A temporary printing error occurred.	1. Turn the product off and then on.
For help press		2. If the message persists, contact an HP-
alternates with			authorized service or support provider.
59.XY ERROR
To continue turn off then on
68.X PERMANENT STORAGE FULL	The permanent storage is full. Some settings	1. If the error does not clear, turn the
For help press	might have been reset to the factory defaults.		product off and then on.
		2.	Print a configuration page and check the
alternates with
			product settings to determine which
68.X PERMANENT STORAGE FULL			values have changed.
		3.	To clean up permanent storage, turn the
To continue press OK
			product off, and then press and hold the
			Menu button	while turning the
			product on.
		4.	If the message persists, contact an HP-
			authorized service or support provider.
68.X PERMANENT STORAGE WRITE FAIL	The storage device is failing to write. Printing	Press the OK button to continue.
To continue press OK	can continue, but there might be some	If the error does not clear, turn the product off
	unexpected behaviors because an error
	occurred in permanent storage.	and then on. If the message persists, contact
		an HP-authorized service or support
		provider.

68.X STORAGE ERROR SETTINGS CHANGED

For help press

alternates with

68.X STORAGE ERROR SETTINGS CHANGED

To continue press OK

An error occurred in the product permanent storage and one or more product settings has been reset to its factory default.

Press the OK button to resume printing.

Print a configuration page and check the product settings to determine which values have changed.

If the error does not clear, turn the product off and then on. If the message persists, contact an HP-authorized service or support provider.

ENWW Interpret control-panel messages 151