Brother 885-V51, XE5427-001 operation manual Error Message Probable Cause, Pressing Retrieve key

————————————————————————————————————————————————————

No	Error Message		Probable Cause
9		You pressed the back key or the embroidery key when a pattern was
		selected.
		You tried to select an embroidery pattern or change the layout when
10		the needle was down.
		The machine is turned on while the needle is lowered and the
		embroidery unit is attached.
11		You tried to initialize the embroidery unit with the embroidery foot		3
		lowered.
12		When 13 or more patterns are in “Removable Disk”, a pattern was
		being retrieved.
		The start/stop button was pressed after selecting a pattern which is
13		saved in the machine's memory or entered from the USB port without
		pressing	(Retrieve key).
14		The needle position button or thread cutter button was pressed while
		the bobbin winder shaft is moved to the right.
15		A pattern is being saved.
16		The start/stop button was pressed when no pattern is selected.
17		Bobbin thread has run out.
		Little bobbin thread remains.

Troubleshooting 83