Brother 885-V51, XE5427-001 Winding/Installing the Bobbin, Bobbin precautions, Winding the bobbin

————————————————————————————————————————————————————

Winding/Installing the Bobbin

This section describes how to wind the thread onto the bobbin, and then insert the bobbin thread.

Bobbin precautions

1

Be sure to observe the following precautions concerning the bobbin.

CAUTION

●Only use the Bobbin (part code: SA156, SFB (XA5539-151)) designed specifically for this machine. Use of any other bobbin may result in injuries or damage to the machine.

●The included bobbin was designed specifically for this machine. If bobbins from other models are used, the machine will not operate correctly. Use only the included bobbin or bobbins of the same type (part code: SA156, SFB (XA5539-151)).

Actual size

11.5mm

(7/16 inch)

This model Other model

Winding the bobbin

Wind the thread around the bobbin to prepare the bobbin thread.

b a

c

aBobbin-winding thread guide

bBobbin winder shaft

cBobbin

Memo

zUse embroidery bobbin thread intended for this machine to get attractive finishes. If you use other threads, the pattern may not turn out correctly. For details, refer to "Optional accessories" (page 9).

Winding/Installing the Bobbin 29