Brother 885-V51, XE5427-001 Preparing the Fabric, Attaching a stabilizer, Material to the fabric

————————————————————————————————————————————————————

Preparing the Fabric

After attaching a stabilizer material to the embroidery fabric, it is stretched on an embroidery frame.

Attaching a stabilizer	Prepare stabilizer material that is larger than	1
	athe embroidery frame being used.
material to the fabric

Attach a stabilizer material for embroidery to the fabric to prevent poor quality embroidery designs.

a		c
	b

Memo	a Fabric
z We recommend the optional stabilizer
	b Size of embroidery frame
material for embroidery. Use a water soluble	c Stabilizer material
sheet on thin materials like organdy and	If you are using stabilizers with adhesive, place
fabrics with a nap like towels.
	bthe adhesive surface of the stabilizer material
To obtain optional accessories or parts, visit
	against the wrong side of the fabric, and iron it
[http://www.brother.com/], or [http://
	with a steam iron.
www.brothermall.com] (in USA).

CAUTION
● Always use stabilizer material for	1
embroidery projects. The needle may
	2
break or bend if you embroider without
using a stabilizer material for thin fabrics	3
or stretch fabrics. Furthermore, the
pattern may not turn out correctly.	a Stabilizer material
	b Fabric (wrong side)
	c Attached surface
	† When it cannot be ironed or placed in the
	hoop
	For fabrics, such as towels, which cannot be
	ironed or for embroidering in places where
	ironing is difficult, place the stabilizer
	material under the fabric, and stretch the
	fabric in the embroidery frame without
	attaching the stabilizer.

Preparing the Fabric 43