Brother 885-V51 Connecting character patterns, Enter DEF and press Press KPress to turn it to

————————————————————————————————————————————————————

Connecting character patterns

If the character pattern is too long to fit in the embroidery frame, follow the steps below.

Example: Connecting "ABC" with "DEF"

aEnter "ABC" and press .

bPress to turn off the programmed thread

cutting ( ).

cPress (Back key).

fPress to turn it to .

XThe stitching starting point is set to lower left of the design.

g	Lower the embroidery foot, and then press	2
	(Start/stop switch) to begin embroidering.

hWhen embroidering is finished, trim the thread leaving the end of the thread longer than usual. Then reset the fabric in the embroidery frame, in a position where you can embroider "DEF".

ab

a Embroidery start position b Embroidery end position

iEnter "DEF" and press .

dPress .

jPress .

ePress .

kPress to turn it to .

XThe stitching starting point is set to lower left of the design.

Editing and Saving Patterns 65