Brother XE5427-001, 885-V51 CTurn on the machine, Confirmation message is displayed

GETTING READY ————————————————————————————————————————————

bSlidearm. the embroidery unit onto the machine Push it in until it clicks and stops.

XThe embroidery unit is attached.

Note

zMake sure that there is no gap between the embroidery unit and the machine, otherwise the embroidery pattern may not be sewn correctly.

Be sure to fully insert the connector into the connection port.

zDo not push on the carriage when attaching the embroidery unit to the machine, otherwise damage to the embroidery unit may result.

cTurn on the machine.

XThe confirmation message is displayed.

dBe sure that no objects or hands are near the

embroidery unit and press .

a

aCarriage

CAUTION

●Do not put your hands or other objects near the carriage. It may cause injury.

Note

zIf the machine is initialized with hands or objects near the carriage, the screen may return to the initial display. After removing whatever is near the carriage, turn the power on again.

XThe screen for selecting the embroidery pattern type is displayed.

Memo

zFor details on the embroidery patterns, refer to "Selecting Embroidery Patterns" (page 50).

XThe carriage moves to its initial position.

20