Brother XE5427-001 When the embroidery unit is attached, Refer to, Machine has been inserted

APPENDIX ——————————————————————————————————————————————

No	Error Message	Probable Cause
18		When the embroidery unit is attached.
19		You tried to set a number of characters that will not fit within the frame.
20		The upper thread has become tangled around the bobbin case, and the
		needle is bent and hitting the needle plate, etc., so the machine stops
		(refer to page 78).
		An Embroidery Memory Card that may not compatible with your
		machine has been inserted.
21		• Certain licensed designs cannot be read by this machine.
		• Designs in an unacceptable card format cannot be read by this
		machine.
		• Design data saved in a hoop size not compatible with your machine
		has been selected.
22		You try to retrieve a pattern downloaded as one for a different machine.
		The start/stop button, the embroidery key, or the memory key is
23		pressed, but the embroidery unit is not attached.
		The embroidery key was pressed when the embroidery unit is not
		attached.
24		The bobbin winder is winding the bobbin.

84