Brother 885-V51, XE5427-001 operation manual Set the embroidery foot perpendicular

————————————————————————————————————————————————————

eWhile pressing in the lever with your finger, fit the embroidery foot bar over the needle clamp screw to attach the embroidery foot to the presser foot bar.

c

b

a

aPresser foot bar

bNeedle clamp screw

cEmbroidery foot bar

fSecure the embroidery foot with the presser foot holder screw.

Set the embroidery foot perpendicular.

a

aPresser foot holder screw

gFirmly tighten the presser foot holder screw. Turn the screwdriver toward the front.

CAUTION

●Do not hit the needle with your finger or the embroidery foot when attaching it. The needle may break or cause injury.

●Be sure to tighten the screw with the included screwdriver. If the screw is loose, the needle may hit the embroidery foot and break or bend.

●Before embroidering, always turn the handwheel toward you (counterclockwise) slowly to make sure that the needle does not hit the embroidery foot. The needle may break or bend.

3

a

aScrewdriver

Attaching the Embroidery Foot 77