Brother 885-V51 Remove the tangled thread. If, Bobbin-winding thread guide Correctly, On it

Models: 885-V51 XE5427-001

1 92
Download 92 pages 29.9 Kb
Page 81
Image 81

————————————————————————————————————————————————————

Symptom

Probable Cause

Remedy

Reference

 

 

 

 

 

 

 

There are knots or tangles in the

Remove any knots or tangles.

-

 

 

thread.

 

 

 

 

 

 

 

 

 

 

 

The upper thread tension is too

Loosen the upper thread tension.

page 63

 

 

tight.

 

 

 

 

 

 

 

 

 

 

 

The thread is tangled, for example,

Remove the tangled thread. If the

 

 

 

thread is tangled in the bobbin case,

page 74

 

 

in the bobbin case.

 

 

clean the race.

 

 

 

 

 

 

 

 

 

 

 

 

The needle is bent or blunt.

Replace the needle.

page 28

 

The upper thread

 

 

 

The needle is incorrectly installed.

Correctly install the needle.

 

 

 

breaks.

 

 

 

 

The area around the hole in the

Replace the embroidery foot.

 

 

 

 

 

 

embroidery foot is scratched, or

Contact your dealer or the nearest

-

 

 

has a burr on it.

authorized service center.

 

3

 

 

 

 

 

The bobbin case is scratched, or

Replace the bobbin case.

 

 

Contact your dealer or the nearest

-

 

 

has a burr on it.

 

 

authorized service center.

 

 

 

 

 

 

 

 

 

 

 

 

 

Incorrect bobbins will not work

 

 

 

A bobbin designed specifically for

properly. Only use a bobbin

page 29

 

 

this machine is not used.

designed specifically for this

 

 

 

 

 

 

machine.

 

 

 

 

 

 

 

 

The thread is not passed through

Correctly pass the thread through the

 

 

Bobbin thread

the bobbin-winding thread guide

page 31

 

bobbin-winding thread guide.

 

correctly.

 

 

does not wind

 

 

 

 

 

 

 

neatly on the

The thread that was pulled out

Wind the thread that was pulled off

 

 

bobbin.

 

 

was not wound onto the bobbin

around the bobbin five or six times

page 32

 

 

 

 

correctly.

clockwise.

 

 

 

 

 

 

 

 

The bobbin thread is incorrectly

Correctly install the bobbin thread.

page 34

 

 

installed.

 

 

 

 

 

 

 

 

 

 

 

The bobbin is scratched or does

 

 

 

 

not rotate smoothly, or has a burr

Replace the bobbin.

-

 

The lower thread is

on it.

 

 

 

 

 

 

 

 

 

 

 

tangled or breaks.

The thread is tangled.

Remove the tangled thread and clean

page 74

 

 

the race.

 

 

 

 

 

 

 

 

 

 

 

 

Incorrect bobbins will not work

 

 

 

A bobbin designed specifically for

properly. Only use a bobbin

page 29

 

 

this machine is not used.

designed specifically for this

 

 

 

 

 

 

machine.

 

 

 

 

 

 

 

The thread is

 

 

 

 

tangled on the

The upper thread was not

Correct the upper threading.

page 38

 

wrong side of the

threaded correctly.

 

 

 

 

fabric.

 

 

 

 

 

 

 

 

 

 

 

Correct the upper threading.

 

 

 

The upper thread was not

Make sure that the thread is hanged

page 38,

 

 

on the thread guide spring which is

 

The thread tension

threaded correctly.

page 39

 

on the left side of the thread guide

 

 

 

 

is incorrect.

 

cover.

 

 

 

 

 

 

 

 

The bobbin thread is incorrectly

Correctly install the bobbin thread.

page 34

 

 

installed.

 

 

 

 

 

 

 

 

 

 

Troubleshooting 79

Page 81
Image 81
Brother 885-V51, XE5427-001 Remove the tangled thread. If, Bobbin-winding thread guide Correctly, On it, Thread is tangled