Brother XE5427-001, 885-V51 operation manual LCD button Example Selecting alphanumeric characters

EMBROIDERY —————————————————————————————————————————————

DISPLAY UNIT

The measurement units that are displayed can be selected. [mm/inch]

■LCD button

Example: Selecting alphanumeric characters

When a specific pattern is selected, press this key and then, press

to switch the display. The

settings such as the specified alphanumeric character string and color are confirmed.

Press this key to change the thread settings.

Press this key to select or cancel programmed thread cutting. When programmed thread cutting is set, the thread is cut automatically after reinforcement.

Press or to change the thread density (characters and frame patterns only).

Press this key to adjust the pattern.

Press this key when you want to change the color, character by character in character embroidery. Since the machine stops at the end of each character, the upper thread is changed as you embroider. Press this key again to cancel multi-color.

The needle progresses one color or one stitch (if pressed continuously, 9 stitches to 30 stitches) at a time and changes the position for starting the embroidery. This is used when a specific color is not embroidered or when restarting the machine after power has been turned off in the middle of the operation.

52