Brother 885-V51, XE5427-001 Appliquéing, KRemove the upper thread, MCut the excess thread

————————————————————————————————————————————————————

kRemove the upper thread.

Note

zBe sure to raise the presser foot lever before removing the upper thread. If you remove the upper thread with the embroidery foot lowered, it may cause malfunction.

lSet up embroidery thread for the next color, and repeat steps b through h.

XWhen the last color is embroidered, "Finished sewing." will appear on the

display. Press , and the display will return to the initial screen.

mCut the excess thread.

Memo

zFor the programmed thread cutting setting, refer to "Setting for embroidering" (page 52).

Appliquéing

Prepare the base fabric and the appliqué fabric

(appliqué piece). Press (Settings key), and set the thread color display to NAME OF COLOR, so "APPLIQUE MATERIAL", "APPLIQUE POSITION" and "APPLIQUE" are displayed on the screen.

aSelect an appliqué pattern.

2

X"APPLIQUE MATERIAL" is displayed on the screen.

bApply iron-on stabilizer to the back of the appliqué piece fabric, and stretch it on the embroidery frame.

cLower the presser foot lever, and press (Start/stop button).

XThe cut-out for the appliqué piece is sewn, and the machine stops.

a

b

aCut-out line

bAppliqué piece fabric

X"APPLIQUE POSITION" will be displayed on the screen.

Embroidering 59