Brother XE5427-001, 885-V51 Error messages, Be sure to rethread the machine. If you press

APPENDIX ——————————————————————————————————————————————

Error messages

When erroneous operations are performed messages and advice on operation will be displayed on the

LCD. Follow what is displayed. If you press or do the operation correctly while the error message is displayed, the message disappears.

No

1

2

3

4

Error Message Probable Cause

There is a possibility that the data for the selected pattern is corrupted.

The start/stop button was pressed at a screen other than the embroidery screen.

Upper thread broken.

Upper thread not set up correctly.

Upper thread has run out.

CAUTION

Be sure to rethread the machine. If you press (Start/stop button)

without rethreading the machine, the thread tension may be wrong or the needle may break and cause injury.

The machine is deleting a previously saved pattern while in embroidery edit mode.

5

While embroidering, data is written to the “Removable Disk” in the connected computer or data is deleted from the “Removable Disk”.

6

on the LCD was pressed when no card was inserted.

7

The start/stop button or thread cutter button was pressed while the embroidery foot was raised.

8

The memory is full and the pattern cannot be saved.

82