Samsung Version 1.1 APPENDIX C How to Use Console

68

APPENDIX C How to Use Console

☞If any key is pressed within two

seconds, manual setup mode

will appear.

☞Indicates Ethernet address

☞Indicates the time elapsed with

SNS-110

☞Indicates IP address, Subnet

Mask, and Gateway

########################################################

# #

# SAMSUNG Electronics. Co., Ltd. #

# webTX(Internet Video Server):SNS-110 #

# Version1.1(2000~2001) All Rights Reserved. #

# #

########################################################

>Current status is Flash Memory Boot

>To change system parameter, press any key within 2 seconds

....IP:168.219.13.11

3, SM:255.255.255.192, GW:168.219.13.65

>Web Transmitter Image Loading<

>Ethernet(MAC) address in Cookie : [00-00-f0-ff-a1-ba]

>Network parameters in gstrIP, gstrSubnetMask, gstrGtwyIP

-IP:168.219.13.113 SM:255.255.255.192 GW:168.219.13.65

>Network Interface Installed

>DNS IP address is empty or invalid

************************* HttpPort = [80]

************************* FTP port = [21]

Initializing External Devices... (f_InitExtDev())

EXTACON0 = 06110a59, EXTACON1 = 00000000

Timing COS/ACS/COH/ACC : 1315 1203 0000 0000

init universal timer(#1), 1ms period

system has 4 decoder(s).

all decoders/channels are reset.

rtc init step skipped.

Rtc time : 2001/1/1 [Mon] 04:06:17

reflected os time : 2001/01/01 04:06:17

JpegRESET: write reg 0 <- 0 fail. a0 read

Jpeg reset ok.. loading..

Jpeg header size : 591 (0x24f) bytes

Console allows condition check-up of SNS-110 by connecting to RS-232C port, manually setting network-

related information.

Starting Console

(1) Connect to RS-232C port on the PC in accordance with

"

Connecting to RS-232C

"

of

"

Chapter 3,

Connecting other equipments”

(2) Use Terminal Emulation (Hyper Terminal) from the connected PC to set the values for RS-232C

through Terminal Emulation.

(3) The following message will appear when you turn on the power of SNS -110.

Message

(1) When the power is turned on, the following message will appear on the console screen when

SNS-110 has been successfully installed.

Contents

Main Before You Begin Warning Regulation Approval Table of Contents ? Chapter 1 SNS-110 Overview Overview Functions and Features Page Names and Function Front View of SNS-110 Name Function Rear of SNS-110 Name Function Chapter 2 Installing SNS-110 Setting Configuration Page Page Page Unpacking Connecting to Camera and Video Image Players (e.g., VTR, DVDP , TV) Chapter 3. Connecting to Instruments Connecting to External Instruments External Device Cable Modem Connecting to Network Ethernet(10BaseT/100BaseT) Connecting to Alarm Sensors and External Devices ALARM IN GG RA 1 2 3 4 - + - + Connecting to PAN/TILT/ ZOOM/ FOCUS Controller If several PAN/TILT/ZOOM/FOCUS controllers are used, they must be the same models. Connecting to RS-232C RS - 232C Terminal (D-Sub 9Pin) RS - 232C Connecting to Cable 9Pin Female to 9Pin Female Terminal Emulation Communication Set-up Items Contents Creating RS-232C Cable 9Pin Female to 25Pin Female Connected from SNS-110 to PC(Twisted Cable) Creating Ethernet Cable Connected from SNS-110 to Hub (Direct Cable) Since the Ethernet Cable is not packed with SNS-110, the user has to purchase and use it . Chapter 4 Setting an IP Address Before You Begin Setting In Ethernet (10BaseT/100BaseT) For Windows 95/98/ME/NT/2000/XP Page Setting in Unix Page Setting with IP Installer Page Page Page Please, refer to Chapter 5 and 7 for Log-in and administration mode network setting up. Setting Other Network Information Changing IP Address In Cable Network through Cable Modem Chapter 5 SNS-110 Log-in Ideal Specification Log-in through Netscape Log-in through Explorer First Time Page After the First Time After the Explorer download completes, please place the security level in its original position. Others Chapter 6. Application Mode (Video Image Monitoring Mode) Initial Screen Single Screen Quadruplex Screen Automatic Sequential Screen Single Screen with PAN/TIL T/ZOOM Contr oller Chapter 7 Administration Mode Initial Screen Camera Set-up Recommend Page PAN/TIL T/ZOOM Set-up Quad/Sequential Set-up Recommend Web Transmitter Set-up Page Page Setting the ALARM / RELAY Out Please, set the valid e-mail address of SNS-110 administrator at e-mail the sender. Recommend Page Network Set-up The SMTP Server should support the e-mail address which is set at the Sender of Alarm/Relay Out. Page Page File Transfer Setting Page Custom User Interface Setup Page Page Page APPENDIX A SNS-110 SPECIFICATIONS Page Regulation Approval Outside view Page APPENDIX B Factory Default How to Enter the Factory Default Values for setting up SNS-110 Page Page APPENDIX C How to Use Console Starting Console Message (2) When you correctly enter user name and password, the following message will appear. " root " Command (1) help: Indicates Command items Page (5)reset: SNS-110 Reset . Manual Configuration Mode (6) freset : the SNS-110 settings are initiated for factory shipment (3) If you enter "p" at "Select items?", you can access the network information. Page Page Page Appendix D Dynamic IP Information Transfer To send IP information to the administrator E-mail Page Registering IP information with Administration server Page Page Page Page APPENDIX E FAQ When inner connections are established but outer ones are not. When e-mails are not sent and alarm sets off When there is no response by executing "Ping" in the process of setting the IP address When connections to SNS-110 cannot be established, after connected to Cable Network If you wish to check the IP Address under auto-set IP address environment