Samsung Version 1.1 - page 48

48

③

Pswd Enable

Restricts the access from other users. If you check the check box of

"

Pswd Enable

"

and click

"

Apply

"

button, you should input registered username and its password in Log-in window to

access to the Application mode.

If you don’t check the check box of

"

Pswd Enable

"

, anyone is accessible to the Application mode.

(4) S/W Upgrade

Upgrade the currently installed program in SNS-110 to the most updated version.

①

Download the updated program version from Samsung Electronics web site .

(www.samsungelectronics.com), or from SNS-110 service man. The file name of SNS-110

program is sns110_vXXX_XXXX.bin.

②

Save the updated program version in the directory of SNS-110-connected PC.

③

Click

"

Browse

"

and select the updated program, sns110_vXXX_XXXX.bin, in the directory.

The selected file will be saved in the browse window.

④

Click

"

Install

"

and open dialog window. You will see caution message, then click

"

OK

"

to start

program upgrade. Upon the upgrade completion, you will see another dialog window. You must

wait approximately for 2 minutes.

⑤

Reboot SNS-110 after the upgrade being completed as shown below.

● Press

"

Reset

"

button on the front panel.

● Turn off and then on SNS-110.

⑥

After successfully upgrade the program, execute web browser and Log-in.

Anyone, who is accessible to Administration mode, may change configurationof SNS-110. If the configuration is deleted or altered, the system may bedamaged or malfunction. Therefore, factory default is set up with rootpassword.After the initial installation, you are strongly recommended to change the rootpassword and restrict the access from other users.

Caution

Wait until the "Upgrading is successful! New code will be loaded afterreset" message appears. Rebooting SNS-110 before this message cancause fatal damage to the machine.

Caution

Contents

Main Before You Begin Warning Regulation Approval Table of Contents ? Chapter 1 SNS-110 Overview Overview Functions and Features Page Names and Function Front View of SNS-110 Name Function Rear of SNS-110 Name Function Chapter 2 Installing SNS-110 Setting Configuration Page Page Page Unpacking Connecting to Camera and Video Image Players (e.g., VTR, DVDP , TV) Chapter 3. Connecting to Instruments Connecting to External Instruments External Device Cable Modem Connecting to Network Ethernet(10BaseT/100BaseT) Connecting to Alarm Sensors and External Devices ALARM IN GG RA 1 2 3 4 - + - + Connecting to PAN/TILT/ ZOOM/ FOCUS Controller If several PAN/TILT/ZOOM/FOCUS controllers are used, they must be the same models. Connecting to RS-232C RS - 232C Terminal (D-Sub 9Pin) RS - 232C Connecting to Cable 9Pin Female to 9Pin Female Terminal Emulation Communication Set-up Items Contents Creating RS-232C Cable 9Pin Female to 25Pin Female Connected from SNS-110 to PC(Twisted Cable) Creating Ethernet Cable Connected from SNS-110 to Hub (Direct Cable) Since the Ethernet Cable is not packed with SNS-110, the user has to purchase and use it . Chapter 4 Setting an IP Address Before You Begin Setting In Ethernet (10BaseT/100BaseT) For Windows 95/98/ME/NT/2000/XP Page Setting in Unix Page Setting with IP Installer Page Page Page Please, refer to Chapter 5 and 7 for Log-in and administration mode network setting up. Setting Other Network Information Changing IP Address In Cable Network through Cable Modem Chapter 5 SNS-110 Log-in Ideal Specification Log-in through Netscape Log-in through Explorer First Time Page After the First Time After the Explorer download completes, please place the security level in its original position. Others Chapter 6. Application Mode (Video Image Monitoring Mode) Initial Screen Single Screen Quadruplex Screen Automatic Sequential Screen Single Screen with PAN/TIL T/ZOOM Contr oller Chapter 7 Administration Mode Initial Screen Camera Set-up Recommend Page PAN/TIL T/ZOOM Set-up Quad/Sequential Set-up Recommend Web Transmitter Set-up Page Page Setting the ALARM / RELAY Out Please, set the valid e-mail address of SNS-110 administrator at e-mail the sender. Recommend Page Network Set-up The SMTP Server should support the e-mail address which is set at the Sender of Alarm/Relay Out. Page Page File Transfer Setting Page Custom User Interface Setup Page Page Page APPENDIX A SNS-110 SPECIFICATIONS Page Regulation Approval Outside view Page APPENDIX B Factory Default How to Enter the Factory Default Values for setting up SNS-110 Page Page APPENDIX C How to Use Console Starting Console Message (2) When you correctly enter user name and password, the following message will appear. " root " Command (1) help: Indicates Command items Page (5)reset: SNS-110 Reset . Manual Configuration Mode (6) freset : the SNS-110 settings are initiated for factory shipment (3) If you enter "p" at "Select items?", you can access the network information. Page Page Page Appendix D Dynamic IP Information Transfer To send IP information to the administrator E-mail Page Registering IP information with Administration server Page Page Page Page APPENDIX E FAQ When inner connections are established but outer ones are not. When e-mails are not sent and alarm sets off When there is no response by executing "Ping" in the process of setting the IP address When connections to SNS-110 cannot be established, after connected to Cable Network If you wish to check the IP Address under auto-set IP address environment