Samsung Version 1.1 - page 82

82

%g : Ethernet address (standard) Example: 00-00-f0-ff-a1-42

%i : IP Address (dotted decimal) Example: 168-219-44-137

%u : IP Address (32bit unsigned integer, hex form)

Example: a8db2c89

%% : Means %

Select Quit Menu to exit Boot Command Mode.

If you entered as the example above, the URL that is transmitted to the SNS-110-set

Administration Server (IP auto-regist server) as follows.

http://168.219.44.147/cgi-bin/webtx.cgi?regist=0000f0ffa142&host=168.219.44.137.

This means to transmit factors like regist=0000f0ffa142 and host=168.219.44.137 to cgi-

bin/webtx.cgi of the Administration server which has 168.219.44.147 address. Samsung

Electronics only provides methods for Ethernet Address and IP aAddress, which transmit

to the Administration server. Administration Server have to save and manage the

information (Ethernet Address and IP Address) which it received. Users must deploy

saving and managing program for this and Samsung Electronics can provide help for

that.

[ WEB Transmitter ( SNS-110 ) Version 1.1 ]

Boot parameters modification menu

--------------------------------------------

[i]. Ip address modify

.

.

.

.

[q]. Quit menu

--------------------------------------------

Select items? [ ] q

--------------------------------------------

[ WEB Transmitter ( SNS-110 ) Version 1.1 ]

Boot command Loop menu

--------------------------------------------

[p]. Print boot parameters

[c]. Change boot parameters

[q]. Quit menu

-------------------------------------------

Select items? [ ] q

New Boot parameter updated.

.

.

.

Contents

Main Before You Begin Warning Regulation Approval Table of Contents ? Chapter 1 SNS-110 Overview Overview Functions and Features Page Names and Function Front View of SNS-110 Name Function Rear of SNS-110 Name Function Chapter 2 Installing SNS-110 Setting Configuration Page Page Page Unpacking Connecting to Camera and Video Image Players (e.g., VTR, DVDP , TV) Chapter 3. Connecting to Instruments Connecting to External Instruments External Device Cable Modem Connecting to Network Ethernet(10BaseT/100BaseT) Connecting to Alarm Sensors and External Devices ALARM IN GG RA 1 2 3 4 - + - + Connecting to PAN/TILT/ ZOOM/ FOCUS Controller If several PAN/TILT/ZOOM/FOCUS controllers are used, they must be the same models. Connecting to RS-232C RS - 232C Terminal (D-Sub 9Pin) RS - 232C Connecting to Cable 9Pin Female to 9Pin Female Terminal Emulation Communication Set-up Items Contents Creating RS-232C Cable 9Pin Female to 25Pin Female Connected from SNS-110 to PC(Twisted Cable) Creating Ethernet Cable Connected from SNS-110 to Hub (Direct Cable) Since the Ethernet Cable is not packed with SNS-110, the user has to purchase and use it . Chapter 4 Setting an IP Address Before You Begin Setting In Ethernet (10BaseT/100BaseT) For Windows 95/98/ME/NT/2000/XP Page Setting in Unix Page Setting with IP Installer Page Page Page Please, refer to Chapter 5 and 7 for Log-in and administration mode network setting up. Setting Other Network Information Changing IP Address In Cable Network through Cable Modem Chapter 5 SNS-110 Log-in Ideal Specification Log-in through Netscape Log-in through Explorer First Time Page After the First Time After the Explorer download completes, please place the security level in its original position. Others Chapter 6. Application Mode (Video Image Monitoring Mode) Initial Screen Single Screen Quadruplex Screen Automatic Sequential Screen Single Screen with PAN/TIL T/ZOOM Contr oller Chapter 7 Administration Mode Initial Screen Camera Set-up Recommend Page PAN/TIL T/ZOOM Set-up Quad/Sequential Set-up Recommend Web Transmitter Set-up Page Page Setting the ALARM / RELAY Out Please, set the valid e-mail address of SNS-110 administrator at e-mail the sender. Recommend Page Network Set-up The SMTP Server should support the e-mail address which is set at the Sender of Alarm/Relay Out. Page Page File Transfer Setting Page Custom User Interface Setup Page Page Page APPENDIX A SNS-110 SPECIFICATIONS Page Regulation Approval Outside view Page APPENDIX B Factory Default How to Enter the Factory Default Values for setting up SNS-110 Page Page APPENDIX C How to Use Console Starting Console Message (2) When you correctly enter user name and password, the following message will appear. " root " Command (1) help: Indicates Command items Page (5)reset: SNS-110 Reset . Manual Configuration Mode (6) freset : the SNS-110 settings are initiated for factory shipment (3) If you enter "p" at "Select items?", you can access the network information. Page Page Page Appendix D Dynamic IP Information Transfer To send IP information to the administrator E-mail Page Registering IP information with Administration server Page Page Page Page APPENDIX E FAQ When inner connections are established but outer ones are not. When e-mails are not sent and alarm sets off When there is no response by executing "Ping" in the process of setting the IP address When connections to SNS-110 cannot be established, after connected to Cable Network If you wish to check the IP Address under auto-set IP address environment