Samsung Version 1.1 owner manual Right after the S/W upgrade, ‘Software Reset’ doesn’t work

Caution Be careful not to install any other file except SNS-110 program (sns110_vXXX_XXXX.bin) during S/W upgrade. You might accidentally trigger the fatal system damage. Always reboot, after the system is upgraded.

After upgrading, Network setting (IP Address, DNS ) is not changed but the user s input is initialized after rebooting and it has to be specified at Administration Mode.

(5)Factory Default

If you click "factory default" button, all information or configuration of SNS-110 will return to the point of purchase, except Ethernet address. Refer to APPENDIX B "Factory Default" for details.

Caution	Be careful when you execute “Factory Default”, because all configuration of
	SNS-110 will return to the initial state, and it disables the Log-in.

(6) Software Reset

Reset the SNS-110 through Network.

Caution	The ‘Software Reset’ will disconnect all of the present connections of SNS-110.
	Right after the S/W upgrade, ‘Software Reset’ doesn’t work.

49