Radio
RQTV0080
Numeric buttons
Manual tuning
1 | Press [TUNER/BAND] to select “FM” or “AM”. | ||
2 | Press [PLAY MODE] to select “MANUAL”. | ||
3 | Press [ /REW/4] or [ /FF/¢] to select the | ||
| frequency of the required station. | ||
|
|
|
|
|
|
|
|
“ST ” is displayed when a stereo FM broadcast is being received.
To tune automatically
Press [/REW/4] or [/FF/¢] for a moment until the frequency starts changing rapidly. The unit begins auto tuning, stopping when it fi nds a station.
•Auto tuning may not function when there is excessive interference.
•To cancel auto tuning, press [/REW/4] or [/FF/¢] once again.
To improve FM sound quality
Press and hold [PLAY MODE] to display “MONO”.
To cancel
Press and hold [PLAY MODE] again until “MONO” disappears.
•MONO is also canceled if the frequency is changed.
•Turn off “MONO” for normal listening.
Memory preset
Up to 15 stations can be set in both the FM and AM bands.
Preparation
Press [TUNER/BAND] to select “FM” or “AM”.
Automatic presetting
Press and hold [PROGRAM] to start presetting.
Manual presetting
1
2 Press [/REW/4] or [/FF/¢] to tune to the required station.
3
4 Press numeric buttons to select a channel.
The station occupying a channel is erased if another station is preset in that channel.
5 Repeat steps 2 to 4 to preset more stations.
Selecting a preset station
Press numeric buttons to select the channel.
For channels 10 to 15 press [h10], then the two digits.
OR
1 | Press [PLAY MODE] to select “PRESET”. |
2 | Press [ /REW/4] or [ /FF/¢] to select the |
| channel. |
FM allocation setting
By main unit only
This system can also receive FM broadcasts allocated in 0.1 MHz steps.
To change the step to 0.1 MHz
1 Press and hold [TUNER/BAND].
After a few seconds the display changes to a fl ashing display of the current minimum frequency.
2 Continue to hold down [TUNER/BAND].
•When the minimum frequency changes, release the button. To return to the original step, repeat the above steps.
•After the setting is changed, any previously preset frequency will be cleared.
10