Panasonic RQTV0080-1P, SC-PM23 Cassette tape, TPS Tape Program Sensor, Recording

Cassette tape

Top of unit

Disc lid

	CD OPEN/CLOSE 0
Basic play	Recording the radio
1 Press [0] and insert the cassette.	1 Insert the cassette to be recorded.

ENGLISH

English

	Forward side	Insert inside the guides
2	Close the lid by hand.
3	Press [TAPE 3] to start play.

To play the other side of the cassette, turn the cassette over.

To	Action
stop tape playback	Press [ 7 ].
start one-touch play	Press [TAPE 3] when the unit is OFF with
	the cassette loaded.
fast-forward and	Press [ /REW/4] or [ /FF/¢] in the
rewind	stop mode.

Note

•Tapes exceeding 100 minutes are thin and can break or get caught in the mechanism.

•Endless tapes can get caught up in the deck’s moving parts if used incorrectly.

TPS (Tape Program Sensor)

2	Tune to the required station (refer to page 10).
3	Press [¶ REC/8] to start recording.
Recording discs
1	Insert the cassette to be recorded.
2	Push [CD OPEN/CLOSE 0] to insert the disc and
	close the lid.
3	Press [CD 3/8] and then [7, –DEMO].
4	Press [PLAY MODE] to select your desired mode
	(refer to page 7).
5	Press [¶ REC/8] to start recording.
Recording programmed tracks
1	Insert the cassette to be recorded.
2	Program the tracks you want (refer to page 8).
3	Press [¶ REC/8] to start recording.

Other basic operations

English

This function enables you to search the beginning of a track, up to a maximum of 9.

Press [/REW/4] or [/FF/¢] during play.

Play resumes from the track found.

Note

TPS may not function properly:

•with short silent parts

•when noise occurs between tunes

•if silent parts are found within tunes

Recording

To	Action
erase a recorded	1)	Insert the cassette to be recorded.
sound	2)	Press [TAPE 3] and then [7, –DEMO].
	3)	Press [¶ REC/8].
stop recording	Press [ 7 ].
stop recording	1)	Press [¶ REC/8].
temporarily	2)	Press again to resume recording.
record on the other	Turn the cassette over and press
side of the tape	[¶ REC/8].

Use normal position tapes.	Erasure prevention
High position and metal position tapes can be used, but this	The illustration shows how to remove the tabs to prevent
unit will not be able to record or erase them correctly.	recording. To record on the tape again, cover as shown.
Preparation			To re-record
Wind the leader tape so that recording can begin		Side A	Normal tape
immediately.
	Tab for side B	Tab for side A	Adhesive tape

RQTV0080

9