Names and Function, Front View of SNS-110

Names and Function

Familiarize yourself with the names and function of each part on the front and back panels, before

installing SNS-110.

3 4

3	4
1.CONTROL 2.F/H 3.Tx R 4.Rx R

7	8	9	10
2

Name	Function

① Video In	Receives input from maximum of 4 video image signals.

② Video Out	Transmit the image output to cameras or other external video-imaging devices
(Loop Through Out)	❈When connected, the terminal resistance of 75Ω is automatically seized.

③ Control S/W	Off : when using as console purpose with RS-232C port connected to a PC
	On : when RS-232C is to be connected to an External Modem.
	❈The current version does not support connecting an External Modem.

④ F H (S/W)	Off : use the RS-485 on the reverse side as Half Duplex
	On : use the RS-485 on the reverse side as Full Duplex TX mode

⑤ Tx R (S/W)	Off : Tx Termination resistance 120 Ω off
	On : Tx Termination resistance 120 Ω on

⑥ Rx R (S/W)	Off : Rx Termination resistance 120 Ω off
	On : Rx Termination resistance 120 Ω on

⑦ Network LED	Blinks when sending or receiving data with the proper connection.

⑧ Power LED	Indicates the power on/off.

Preset Button	Returns to the initial set-up environment of factory default

Reset Button	Restarts SNS-110 without turning off the power.