Samsung Version 1.1 - page 81

81

Type "1" and go to IP auto-regist server address" to type registered Web Server address.

The example below is the IP Address such as 168.219.44,137 or registered host name

such as www.samsung.co.kr.

Type "2" and go to IP auto-regist cgi format to type the cgi program path to transmit or

the name of name of the program path, or the transfer factor.

Cgi format to type here are as follows.

[CGI path] : It is the path of the directory which CGI program is located and it

has to start with the root symbol (/).

The example above is /cgi-bin/.

[CGI program] : It is one of the names of CGI program which server provides.

The example above is webtx.cgi.

[Format string] : It is the value that is transmitted as factor to the CGI program.

If you use the following values starting with %, you can send

the SNS-110 network information.

%e : The last three digits of Ethernet address (Hex form)

Example: ffa142

%f : The six digits of Ethernet address (Hex form)

Example: 0000f0ffa142

[ WEB Transmitter ( SNS-110 ) Version 1.1 ]

Boot parameters modification menu

--------------------------------------------

[i]. Ip address modify

.

.

.

.

[q]. Quit menu

--------------------------------------------

Select items? [ ] 1

IP auto-regist server? 168.219.44.147

[ WEB Transmitter ( SNS-110 ) Version 1.1 ]

Boot parameters modification menu

--------------------------------------------

[i]. Ip address modify

.

.

.

.

[q]. Quit menu

--------------------------------------------

Select items? [ ] 2

IP auto-regist cgi? [/cgi-bin/webtx.cgi?regist=%e&host=%i] /cgi-bin/webtx.cgi?regist=%f&host=%i

Contents

Main Before You Begin Warning Regulation Approval Table of Contents ? Chapter 1 SNS-110 Overview Overview Functions and Features Page Names and Function Front View of SNS-110 Name Function Rear of SNS-110 Name Function Chapter 2 Installing SNS-110 Setting Configuration Page Page Page Unpacking Connecting to Camera and Video Image Players (e.g., VTR, DVDP , TV) Chapter 3. Connecting to Instruments Connecting to External Instruments External Device Cable Modem Connecting to Network Ethernet(10BaseT/100BaseT) Connecting to Alarm Sensors and External Devices ALARM IN GG RA 1 2 3 4 - + - + Connecting to PAN/TILT/ ZOOM/ FOCUS Controller If several PAN/TILT/ZOOM/FOCUS controllers are used, they must be the same models. Connecting to RS-232C RS - 232C Terminal (D-Sub 9Pin) RS - 232C Connecting to Cable 9Pin Female to 9Pin Female Terminal Emulation Communication Set-up Items Contents Creating RS-232C Cable 9Pin Female to 25Pin Female Connected from SNS-110 to PC(Twisted Cable) Creating Ethernet Cable Connected from SNS-110 to Hub (Direct Cable) Since the Ethernet Cable is not packed with SNS-110, the user has to purchase and use it . Chapter 4 Setting an IP Address Before You Begin Setting In Ethernet (10BaseT/100BaseT) For Windows 95/98/ME/NT/2000/XP Page Setting in Unix Page Setting with IP Installer Page Page Page Please, refer to Chapter 5 and 7 for Log-in and administration mode network setting up. Setting Other Network Information Changing IP Address In Cable Network through Cable Modem Chapter 5 SNS-110 Log-in Ideal Specification Log-in through Netscape Log-in through Explorer First Time Page After the First Time After the Explorer download completes, please place the security level in its original position. Others Chapter 6. Application Mode (Video Image Monitoring Mode) Initial Screen Single Screen Quadruplex Screen Automatic Sequential Screen Single Screen with PAN/TIL T/ZOOM Contr oller Chapter 7 Administration Mode Initial Screen Camera Set-up Recommend Page PAN/TIL T/ZOOM Set-up Quad/Sequential Set-up Recommend Web Transmitter Set-up Page Page Setting the ALARM / RELAY Out Please, set the valid e-mail address of SNS-110 administrator at e-mail the sender. Recommend Page Network Set-up The SMTP Server should support the e-mail address which is set at the Sender of Alarm/Relay Out. Page Page File Transfer Setting Page Custom User Interface Setup Page Page Page APPENDIX A SNS-110 SPECIFICATIONS Page Regulation Approval Outside view Page APPENDIX B Factory Default How to Enter the Factory Default Values for setting up SNS-110 Page Page APPENDIX C How to Use Console Starting Console Message (2) When you correctly enter user name and password, the following message will appear. " root " Command (1) help: Indicates Command items Page (5)reset: SNS-110 Reset . Manual Configuration Mode (6) freset : the SNS-110 settings are initiated for factory shipment (3) If you enter "p" at "Select items?", you can access the network information. Page Page Page Appendix D Dynamic IP Information Transfer To send IP information to the administrator E-mail Page Registering IP information with Administration server Page Page Page Page APPENDIX E FAQ When inner connections are established but outer ones are not. When e-mails are not sent and alarm sets off When there is no response by executing "Ping" in the process of setting the IP address When connections to SNS-110 cannot be established, after connected to Cable Network If you wish to check the IP Address under auto-set IP address environment