Integra DTR-9.1 appendix Speaker Setup menu

Speaker Setup

1. Speaker Setup menu

After you have installed the DTR-9.1, connected all the components, and determined the speaker layout, it is now time to perform the settings in the Speaker Setup menu for the optimum sound acoustics for your envi- ronment and speaker layout.

Before you perform the following settings, it is important that you first determine the following characteristics:

•The types and sizes of the speakers that are con- nected.

•The distance from each speaker to your normal lis- tening position.

Menu
1.Speaker Setup
1.Speaker Setup
2.Input Setup
3.Listening Mode Setup
4.Preference
1.Speaker Config
5.Zone2 OSD Setup
2.Speaker Distance
6.About
3.Level Calibration
4.Bass Peak Level
5.LFE Level Setup
Select:	Exit:EXIT
Enter:ENTER Quit:OSD
	Quit:OSD

Memo:
		Monitor
Front	SW	Center	Front

1-1. Speaker Config sub-menu

Here you will enter which speakers are connected and the size of each speaker.

Menu

1.Speaker Setup 1.Speaker Setup 2.Input Setup

3.Listening Mode Setup
4.Preference
1.-Speaker1.ConfigConfig
5.Zone2 OSD Setup
2.Speaker Distance
6.About
3.Level Calibration
4.aBass.SubwooferPeak Level:Yes
5.bL.FErontLevel		:Large
Select:	Exit:EXIT
c.Center		:Large
Enter:ENTER Quit:OSD
d.Surround L/R
		:Large
e.Surround		BackQuit:OSD
		:Large
		Quit:OSD

a. Subwoofer

Yes: Select when a subwoofer is connected.

No: Select when a subwoofer is not connected.

b. Front

Large: Select if the front speakers are large sized.

Small: Select if the front speakers are small sized.

•If “No” is selected for the Subwoofer setting, then this setting is fixed to “Large.”

c.Center

None: Select if no center speaker is connected.

Large: Select if the center speaker is large sized.

[]

m/ft

[]m/ft

SL

[]m/ft

[]m/ft

SBL

[]m/ft

[ ]m/ft

[ ]m/ft

SR

[ ]m/ft

SBR

Small: Select if the center speaker is small sized.

•If “Small” is selected for the Front setting, then “Large” cannot be selected for this setting.

d.Surround L/R

None: Select if no surround left and right speakers are connected.

Large: Select if the surround left and right speakers are large sized.

Small: Select if the surround left and right speakers are small sized.

•If “Small” is selected for the Front setting, then “Large” cannot be selected for this setting.

e.Surround Back

None: Select if no surround back left and right speakers are connected.

Large: Select if the surround back left and right speak- ers are large sized.

Tip:

When setting the speaker size in the Speaker Config sub-menu, use the guidelines given below.

Large: The complete frequency range for the channel you are setting will be output from the speaker.

Small: Frequencies of the channel you are setting lower than 80 Hz will be output from the subwoofer.If the front speakers are set to “Large,” then the sound may be output from both the left and right speakers. (All THX speakers are small.)

Small: Select if the surround back left and right speak- ers are small sized.

•If “None” is selected for the Surround L/R setting, then this setting is fixed to “None.”

•If “Small” is selected for the Surround L/R setting, then “Large” cannot be selected for this setting.

30