Integra DTR-9.1 appendix Input Setup menu

Input Setup

2. Input Setup menu

This menu allows you to setup the various input sources available with the DTR-9.1. Each input source may have a great number of settings that are difficult to keep track of, so we recommend making a chart to record what you have set and for which component to prevent confusion later.

	Menu
	123456789012345678901234
	1.Speaker Setup
12.Input Setup
	2.Input Setup
2	Input:VIDEO1
	3.Listening		Mode Setup	Current
34.Preference
4	1.Digital Setup			Input
5	5.Zone2 OSD Setup
	2.Multichannel Setup			Source
6	6.About
	3.Video Setup
7	4.Listening Mode Preset
8	5.Delay	Exit:EXIT
Select:
9	6.Sound	Effect
Enter:ENTER Quit:OSD
0	7.Character Input

1 8.Miscellaneous Setup

2Quit:OSD

2-1. Digital Setup sub-menu

The settings made in this sub-menu are valid for the input source that is currently selected with the input source buttons at the front panel and, therefore, these settings are made separately for each digital input source. This sub-menu will not appear if the Multichannel setting in the Multichannel Setup sub- menu is set to “On” for the selected input source, or if the selected input source button is AM, FM, or PHONO. If this setting is incorrectly made, the digital audio signals may not be properly output, or not heard at all.

Menu

123456789012345678901234 1.Speaker Setup

12.Input Setup

2.Input Setup

2 Input:VIDEO1

33.Listening4.PreferenceMode Setup

4 21-.1Dig.igitalSetupSetup

5.Zone2 OSD Setup

5 2.MulInput:VIDEO1tichannel Setup

6.About

6 3.Video Setup

7 4a..ListeningDigitalInputMode Preset

8 5.Sound Effect:OPT1

Select: Exit:EXIT 9 6.Character Input Enter:ENTER Quit:OSD 0 7b..MiscellaneDigitalFormatusSetup

1:Auto

2Quit:OSD

Quit:OSD

a.Digital Input

This setting tells the DTR-9.1 which input source button on the front panel is connected with which digital input jack on the rear panel. To perform this setting, you must first select a digital input source at the front panel and then set the name of the digital input jack it is con- nected to here.

For example, if the input source selected at the front panel is CD and the compact disc player is connected to OPTICAL IN 1, then select “OPT1” here. If the input source selected is not connected to a digital input, then select “----.”

OPT1: Select if connected to DIGITAL INPUT (OPTICAL) 1.

OPT2: Select if connected to DIGITAL INPUT (OPTICAL) 2.

OPT3: Select if connected to the DIGITAL INPUT (OPTICAL) 3.

COAX1: Select if connected to DIGITAL INPUT (COAXIAL) 1.

COAX2: Select if connected to DIGITAL INPUT (COAXIAL) 2.

COAX3: Select if connected to DIGITAL INPUT (COAXIAL) 3.

COAX4: Select if connected to DIGITAL INPUT (COAXIAL) 4.

COAX5: Select if connected to DIGITAL INPUT (COAXIAL) 5.

–– – –: Select if the input source is not from a digital input jack.

b. Digital Format

The default setting is “Auto.” If “----” is selected for this

input source at the Digital Input setting, then this setting will not appear. Although you can use this default set- ting as is, you may change it as desired depending on the input signal format (e.g., if you know that you will always be listening to a certain input signal format from a particular input source).

34