Recording a source
To record an input source signal different from that you are currently watching or listening to
This method outputs to the audio and video outputs the signal from the input source that you select here. This allows you to record an input source signal different from that that you are listening to or watching at the time of recording.
1.Press the Rec Out button.
2.Within 8 seconds, press the input source selector button of the input source signal that you wish to record.
The indicator above the selected input source will light red. The signal from the selected input source will now be output to the TAPE 1 OUT, TAPE 2 OUT, VIDEO 1 OUT, and VIDEO 2 OUT outputs for record- ing.
3.Start recording at the recording component as desired.
To confirm the settings, press the Rec Out button. The current settings will appear for 8 seconds in the front display.
Notes:
•Be aware that the remote (Zone 2) and recording (Rec Out) outputs use the same circuit and there- fore can be used at the same time.
•You cannot record the surround effects.
•Digital signals input to the DIGITAL INPUT (COAXIAL) and DIGITAL INPUT (OPTICAL) inputs will be output to the DIGITAL OUTPUT (COAXIAL) and DIGITAL OUTPUT (OPTICAL) outputs.
•There are some restrictions on recording digital sig- nals. When making digital recordings, consult the in- struction manual that came with your digital record- ing equipment (e.g., MD recorder or DAT deck) to know what restrictions are imposed.
•You cannot record the source connected to the MULTI CHANNEL INPUT connector.
Recording the video from one source and the audio from another
You can add the sound from one source to the video of another source to make your own video recordings.
Below is an example of recording the sound from a compact disc player connected to CD IN and the video from a video camera connected to VIDEO 5 IN to video cassette tape in a video cassette recorder connected to the VIDEO 1 OUT jack.
1.Press the CD input source button.
2.Set “VIDEO 5” for the Video setting in the
Video Setup
3.Insert a CD in the CD player and insert a tape in the video camera connected to the VIDEO 5 IN.
4.Insert a video tape for recording in the video cassette recorder connected to VIDEO 1 OUT.
5.Press the Rec Out button twice within 8 seconds.
The indicator above the CD input source button lights red. Now “CD” has been selected as the au- dio input source and “VIDEO 5” as the video input source.
INPUT DIGITAL
VIDEO
5
6.Start recording on the video cassette recorder and start playing at the CD player and video camera as desired.
Notes:
•If you change the input source during recording, you will record the audio signals from the newly se- lected input source and the video signals assigned to that input source.
•You cannot record the surround effects.
55
