Programming the commands of remote controllers for other devices into the remote controller
SEND/LEARN indicator
MODE 
buttons
AUDIO |
|
| MUTING |
|
TRACK | DISC |
| ||
REC |
|
| OPEN/COLSE |
|
DVD |
|
| CD |
|
T1 | T2 | TUN | PH |
|
V1 | V2 | V3 | V– |
|
STEREO |
| DIRECT | DSP |
|
1 |
| 2 | 3 |
|
SURROUND |
| THX | DSP |
|
4 |
| 5 | 6 |
|
| CH SEL | LEVEL + |
| |
7 |
| 8 | 9 |
|
LATE NIGHT DIMMER | LEVEL – | ENT | ||
+ 10 |
| 0 | ENT | |
HOME THEATER CONTROLLER
SEND/LEARN indicator
MODE 
buttons
AUDIO |
|
| MUTING |
|
TRACK | DISC |
| ||
REC |
|
| OPEN/COLSE |
|
DVD |
|
| CD |
|
T1 | T2 | TUN | PH |
|
V1 | V2 | V3 | V– |
|
STEREO |
| DIRECT | DSP |
|
1 |
| 2 | 3 |
|
SURROUND |
| THX | DSP |
|
4 |
| 5 | 6 |
|
| CH SEL | LEVEL + |
| |
7 |
| 8 | 9 |
|
LATE NIGHT DIMMER | LEVEL – | ENT | ||
+ 10 |
| 0 | ENT | |
HOME THEATER CONTROLLER
Erasing the programmed command from one button
You can only erase memorized commands and not preset ones.
1.Press and hold down the desired MODE button for the command, press the ENT button, and then release both buttons.
When you press the MODE button, the SEND/LEARN indicator lights and that mode appears in the dis- play. When you press the ENT button, the lamp turns off. When you release the buttons, the lamp lights again and “LEARN” appears in the display.
2.Press and release the button for the command you wish to erase.
When you press the button, the SEND/LEARN indica- tor turns off and “RCV” appears in the display. When you release the button, the lamp lights again.
3.Press and release the same button again.
The SEND/LEARN lamp flashes twice slowly and “CLEAR” appears in the display. The memorized command is erased.
Note:
•If no button is pressed for more than 30 seconds dur- ing the programming, the SEND/LEARN indicator flashes three times quickly, “ERROR” appears in the display, and the remote controller exits the pro- gramming mode. Resume from Step 1.
Erasing all the commands programmed under a MODE button
1.Press and hold down the desired MODE button, press the ENT button twice, and then release both buttons.
When you press the MODE button, the SEND/LEARN indicator lights and that mode appears in the dis- play. When you press the ENT button, the lamp turns off. When you release the buttons, the lamp flashes twice slowly and then lights again.
2.Press and release the same MODE button again.
When you release the button, the SEND/LEARN indi- cator flashes twice slowly. This erases all the com- mands memorized to the MODE button.
Notes:
•If no button is pressed for more than 30 seconds dur- ing the programming, the SEND/LEARN indicator flashes three times quickly and the remote control- ler exits the programming mode. Resume from Step 1.
•If you perform an invalid operation during program- ming, the SEND/LEARN indicator flashes three times quickly, “ERROR” appears in the display, and the re- mote controller exits the programming mode. Re- sume from Step 1.
•If many commands have been programmed to the MODE button, then the SEND/LEARN indicator may remain lit for some time during Step 2. This is not a malfunction.
63
