Integra DTR-9.1 Off, Dsp, Dimmer, Tuning, Preset, FM Mode, Memory, Menu, , , Enter, , , Exit

Front panel facilities

To use the same input source for the both the main and remote zones, press the Zone 2 button twice in succession.

Note:

The Rec Out and Zone 2 buttons use the same circuit and therefore cannot be used at the same time.

when Zone 2 is selected, the currently selected input source is output from the recording terminal.

Off

When not using either Rec Out or Zone 2, press that but- ton and then press the Off button to turn off the signal. If the Rec Out or Zone 2 signal is turned on and the con- nected component is not turned on, the electric signal will still be sent through the circuitry and the excess load may cause deterioration of the audio signal.

DSP

Press these buttons to scroll through the listening modes and set a new one for the input source you are cur- rently listening to. For each different input signal, differ- ent listening modes are possible. See page 38 for a de- tailed explanation of the different listening modes.

Dimmer

Press to set the brightness of the front display. There are 4 settings available: normal, dark, very dark, and off.

•The dimmer control for the front display can be per- formed at the remote controller.

Tuning

Use these buttons to change the tuner frequency. The tuner frequency is displayed in the front display and it can be changed in 50 Hz increments for FM and 10-kHz increments for AM. When a station is tuned into,

“> <” or “” will appear in the front display.

When FM is selected, you can hold down one of the tuning buttons and then release it to activate the auto- search feature. It will search for a station in the direc- tion of the button you pressed and stop when it tunes into one.

Preset

When AM or FM is selected as the input source, press one of these buttons to jump to a radio station that you preset using the MEMORY button. Pressing the right but- ton moves from the most recently preset station to older ones, and pressing the left button moves in the reverse order.

FM Mode

If you are listening to an FM radio station in stereo and the sound cuts out or there is a great deal of noise, then press this button. The “MONO” display will appear and the output will change to mono. Though you will not hear the audio in stereo, this may stop the sound from cutting out and reduce excess noise.

Memory

This button only operates when FM or AM is selected as the input source. This button allows you to preset fre- quencies for stations when using the FM/AM tuner. You can preset up to 40 stations (or frequencies) to be used with the PRESET buttons.

Menu, , , Enter, , , Exit

These buttons are used with the On Screen Display (OSD) menu. They also perform the same functions as the OSD MENU, (upper edge of ENTER button), (lower edge of ENTER button), (left edge of ENTER button), (right edge of ENTER button), ENTER, and EXIT RETURN buttons on the remote controller.

Menu: Press to bring up the OSD menu.

Exit: Press to exit the OSD menu when at the Menu Screen, or move to one screen previous to the one that is displayed if at any other screen.

and : When selecting items in the OSD Menu, press these buttons to move the on-screen cursor (or the highlighted portion) upward and downward.

and : When setting parameters in the OSD menu, press these buttons to select parameter values or modes.

Enter: Press to display the screen for the selected item in the OSD Menu.

PHONES

This is a standard stereo jack for connecting stereo headphones. The audio for the front right and left speakers are sent to the headphone speakers. When the headphones are plugged in, the listening mode automatically changes to stereo and output to the speakers is stopped.

Front panel display

Listening mode or digital input format indicators

Multi function display

Sleep indicator

Input source format indicator

Video display

10