Integra DTR-9.1 appendix Specifications

Integra Division of

ONKYO U.S.A. CORPORATION

200 Williams Drive, Ramesy, N.J. 07446, U.S.A.

Tel: 201-825-7950 Fax: 201-825-8150E-mail: integra@onkyousa.com

Integra Division of

ONKYO CORPORATION

Sales & Product Planning Div. : 2-1,Nisshin-cho,Neyagawa-shi, OSAKA 572-8540, JAPAN

Tel: 072-831-8111 Fax: 072-833-5222

SN 29342900

±10 dB at 100 Hz ±10 dB at 10 kHz

80 dB (IHF A, 5 mV input)

100 dB (IHF A, 0.5 V input)

COMPONENT VIDEO OUT:

Phono Overload: Frequency Response:

RIAA Deviation: Tone Control

Bass:

Treble:

Signal-to-Noise Ratio (Stereo) Phono:

CD/Tape:

Specifications

AMPLIFIER SECTION		TUNER SECTION
Continuous Average Power output (FTC)		FM
All channels:	130 watts per channel min. RMS	Tuning Range:	87.5 — 108.0 MHz (50 kHz steps)
	at 8 ohms, 2 channels driven	Usable Sensitivity
	from 20 Hz to 20 kHz with no	Mono:	11.2 dBf, 1.0 µV (75 ohms IHF)
	m o r e t h a n 0 . 0 5 % t o t a l		0.9 µV (75 ohms DIN)
	harmonic distortion.	Stereo:	17.2 dBf, 2.0 µV (75 ohms IHF)
	170 watts min. RMS at 6 ohms, 2		23 µV (75 ohms DIN)
	channels driven from 1 kHz with	50 dB Quieting Sensitivity
	no more than 0.1% total	Mono:	17.2 dBf, 2.0 µV (75 ohms)
	harmonic distortion.	Stereo:	37.2 dBf, 20 µV (75 ohms)
Continuous Power output (DIN)		Capture Ratio:	2.0 dB
Maximum Power output (EIAJ)	160 watts at 6 ohms	Image Rejection Ratio	40 dB
	200 watts at 6 ohms	IF Rejection Ratio:	90 dB
Dynamic Power Output (Stereo)		Signal-to-Noise Ratio
	2 ⋅ 300 watts at 3 ohms	Mono:	76 dB
	2 ⋅ 230 watts at 4 ohms	Stereo:	70 dB
	2 ⋅ 150 watts at 8 ohms	Alternate Channel Attenuation:		55 dB
Total Harmonic Distortion:	0.05% at rated power	Selectivity:	50 dB (DIN)
	0.05% at 1 Watt output	AM Suppression Ratio:	50 dB
IM Distortion:	0.05% at rated power	Total Harmonic Distortion
	0.05% at 1 Watt output	Mono:	0.2%
Damping Factor:	60 at 8 ohms	Stereo:	0.3%
Input Sensitivity and Impedance		Frequency Response:	30 Hz — 15 kHz, ±1.0 dB
PHONO:	2.5 mV, 50 kohms	Stereo Separation:	45 dB at 1 kHz
LINE (CD, TAPE 1-2, DVD,		AM	30 dB at 100 Hz — 10 kHz
VIDEO 1-5):	200 mV, 50 kohms
MULTICHANNEL INPUT		Tuning Range:	530—1,710 kHz (10 kHz steps)
(FRONT L/C/R, SURROUND		Usable Sensitivity:	30 µV
L/R, SURROUND BACK L/R):	200 mV, 50 kohms	Image Rejection Ratio:	40 dB
(SUBWOOFER):	36 mV, 50 kohms	IF Rejection Ratio:	40 dB
AMP IN (FRONT L/C/R) :	1 V, 50 kohms	Signal-to-Noise Ratio:	40 dB
COAXIAL 1-5 (DIGITAL):	0.5 Vp-p, 75 ohms	Total Harmonic Distortion:	0.7%
DVD, VIDEO1-5:	1 Vp-p, 75 ohms	GENERAL
	1 Vp-p, 75 ohms (Y)
		Power Supply:	AC 120 V, 60 Hz
	0.28 Vp-p, 75 ohms (C)
COMPONENT VIDEO 1-3:	1 Vp-p, 75 ohms (Y)	Power Consumption:	11 A
	0.5 Vp-p, 75 ohms (PB, PR)	Dimensions (W ⋅ H ⋅ D):	17-1/8" ⋅ 7-11/16" ⋅ 18"
Output Level and Impedance		Weight:	49.4 lbs.
Rec out (TAPE 1-2, VIDEO 1-2):		REMOTE CONTROLLER
	200 mV, 2.2 kohms
		Transmitter:	Infrared
Pre out:	1 V, 470 ohms
		Signal range:	Approx. 5 meters, 16 ft.
ZONE 2 OUT:	100mV, 470 ohms
		Power supply:	Two “AA” batteries (1.5 V ⋅ 2)
VIDEO (VIDEO 1-2, MONITOR
OUT, ZONE 2 OUT):	1 Vp-p, 75 ohms	Specifications and features are subject to change without
	1 Vp-p, 75 ohms (Y)

0.28 p-p, 75 ohms (C)	notice.
1 Vp-p, 75 ohms (Y)
0.5 Vp-p, 75 ohms (PB, PR)
110 mV RMS at 1 kHz, 0.5% T.H.D.
20 Hz to 30 kHz : ±1dB
(CD in Direct mode)
5 Hz to 100 kHz : +1dB,-3dB
(CD in Direct mode)
20 to 20 kHz : ±0.8 dB

Printed in Japan D0004-1

E