Using a Macro function
MODE MACRO
MODE buttons
AUDIO |
|
| MUTING |
TRACK | DISC | ||
REC |
|
| OPEN/COLSE |
DVD |
|
| CD |
T1 | T2 | TUN | PH |
V1 | V2 | V3 | V– |
STEREO |
| DIRECT | DSP |
1 |
| 2 | 3 |
SURROUND |
| THX | DSP |
4 |
| 5 | 6 |
| CH SEL | LEVEL + | |
7 |
| 8 | 9 |
LATE NIGHT DIMMER | LEVEL – | ||
+ 10 |
| 0 | ENT |
HOME THEATER CONTROLLER
Erasing a macro from the MODE MACRO button
1.Press and hold down the desired MODE button, press the MODE MACRO button, and then release both buttons.
When you press the MODE button, the SEND/LEARN indicator lights and that mode appears in the dis- play. When you press the MODE MACRO button, the indicator turns off. When you release the buttons, the indicator flashes once and “M 01” appears in the display.
2.Press the MODE MACRO button again.
The SEND/LEARN indicator flashes twice slowly and “CLEAR” appears in the display. The macro pro- grammed to the MODE button pressed in Step 1 above is erased.
Notes:
•If no button is pressed for more than 30 seconds dur- ing the programming, the SEND/LEARN indicator flashes three times quickly, “ERROR” appears in the display, and the remote controller exits the pro- gramming mode. Resume from Step 1.
•Be aware that if you press a button other than MODE MACRO button in Step 2, then you will in ef- fect be overwriting the previous macro with a new macro.
DIRECT MACRO 
MODE buttons 
AUDIO |
|
| MUTING |
TRACK | DISC | ||
REC |
|
| OPEN/COLSE |
DVD |
|
| CD |
T1 | T2 | TUN | PH |
V1 | V2 | V3 | V– |
STEREO |
| DIRECT | DSP |
1 |
| 2 | 3 |
SURROUND |
| THX | DSP |
4 |
| 5 | 6 |
| CH SEL | LEVEL + | |
7 |
| 8 | 9 |
LATE NIGHT DIMMER | LEVEL – | ||
+ 10 |
| 0 | ENT |
HOME THEATER CONTROLLER
Erasing a direct macro from the DIRECT MACRO button
1.Press and hold down any one of the eight MODE buttons, press the DIRECT MACRO button, and then release both buttons.
When you press the MODE button, the SEND/LEARN indicator lights and that mode appears in the dis- play. When you press the DIRECT MACRO button, the indicator turns off. When you release the but- tons, the indicator flashes once and “M 01” appears in the display.
2.Press the DIRECT MACRO button again.
The SEND/LEARN indicator flashes twice slowly and “CLEAR” appears in the display. The macro pro- grammed to the DIRECT MACRO button is erased.
Notes:
•If no button is pressed for more than 30 seconds dur- ing the programming, the SEND/LEARN indicator flashes three times quickly, “ERROR” appears in the display, and the remote controller exits the pro- gramming mode. Resume from Step 1.
•Be aware that if you press a button other than DI- RECT MACRO button in Step 2, then you will in effect be overwriting the previous direct macro with a new direct macro.
66
