Integra DTR-9.1 appendix Preference menu

Preference

4. Preference menu

This menu provides settings for you to customize certain functions of the DTR-9.1 as you wish.

	Menu
	123456789012345678901234
	1.Speaker Setup
14.Preference
22.Input Setup
33.Listening Mode Setup
4	4.Preference
	1.Volume Setup
55.Zone2 OSD Setup
6	6.About
	2.OSD Setup
7	3.OSD Tweak
8
Select:		Exit:EXIT
9
Enter:ENTER Quit:OSD
0
1		Quit:OSD
2

4-1. Volume Setup sub-menu

This sub-menu allows you to make various settings concerning the volume control of the DTR-9.1.

		Menu
	123456789012345678901234
	1.Speaker Setup
14.Preference
22.Input Setup
3	3.Listening Mode Setup
		123456789012345678901234
	4.Preference
4141-.1Volume.SetupSetup
	5.Zone2 OSD Setup
52
	6.About
632a..OSDVolumeSetupDisplay
74			:Absolute
853b..OSDMutingTweakLevel
Select:			Exit:EXIT
96			:-50dB
Enter:ENTER Quit:OSD
07		c.Maximum Volume
18			:Off
29		d.Power	On VolumeQuit:OSD
	0		:Last
	1		Quit:OSD
	2

a. Volume Display

You can choose from two ways of displaying the vol- ume setting on screen.

Absolute: This displays the volume with a minimum of min (0) for no sound and a maximum of max (100). As a reference, the volume setting of Ref (82) is used as the 0 -decibel for the relative display method.

Relative: This displays the volume as a decibel value on a scale with a designated reference point that is displayed as 0, which equals the volume setting of 82 for the absolute display method. With this display method, the minimum value is - , the next highest is -81, and the maximum value is +18.

b. Muting Level

This sets the attenuation level during playback when the Muting button is pressed on the remote controller. This can be set between - , -50 and -10 decibels in 10- decibel increments.

c. Maximum Volume

This sets a maximum limit for the master volume to re- duce the chance of any components becoming dam- aged from accidental increases to the volume. For the absolute volume display method, this can be set be- tween 50 and 90. For the relative volume display method, this can be set between -32 and +17 decibels.

d. Power On Volume

This sets a designated volume setting for the DTR-9.1 to be set every time that the power is turned on. This pre- vents the DTR-9.1 from being turned on while it is set to an extremely high volume and suddenly output very loud sounds. For the absolute volume display method, this can be set between 0 and 99. For the relative vol- ume display method, this can be set between - and +18 decibels. If you do not mind having the DTR-9.1 turned on with its current volume setting, set this to “Last Valid.”

46