Vulcan-Hart EG24 ML-52486 Installation of Hot Top Bricks, Backsplash Component Parts

Installation of Hot Top Bricks

The hot top sections utilize composite/mortar fire bricks for heat distribution of the burners. Install these bricks before connecting the gas supply line or installing the back riser.

1.The composite/mortar bricks are shipped in a rectangular cardboard box. Locate box and carefully remove two 10" x 4" (254 x 101.6 mm), two 7" x 4" (177.8 x 101.6 mm), and one triangular 97⁄16" x 2" x 17⁄8" (239.7 x 50.8 x 47.6 mm) bricks. There should be one box of bricks per hot top section ordered.

2.Rest the hot top plate in a secure area.

3.Install two 10" x 4" (254 x 101.6 mm) composite/mortar bricks, placing the miter edge, one to each side of the front burner baffle area (see Fig. 4).

4.Install two 7" x 4" (177.8 x 101.6 mm) bricks, one to each side of the rear burner baffle area (see Fig. 4).

5.Install the triangular 97⁄16" x 2" x 17⁄8" (239.7 x 50.8 x 47.6 mm) brick across the baffle burner area front (see Fig. 4).

6.If burner has been strapped down, remove the wire strapping device, using wire cutters.

7.Check to ensure that all bricks and the burner are secure. Carefully replace the hot top section on top of the range.

Backsplash

The range is equipped with a 23" (584.2 mm) high backsplash and shelf.

1.Remove the backsplash components from the crating materials.

2.Check the backsplash component parts against the list below to ensure that all the required parts for the backsplash installation have been obtained. (See Fig's. 5 & 6.) If any parts are missing, contact your dealer or closest parts depot immediately.

Backsplash Component Parts

MODELS

EG24	EG36	EG60 & 160	EG260
Std. 23" (584.2 mm)	Std. 23" (584.2 mm)	Std. 23" (584.2 mm)	Std. 23" (584.2 mm)
High Backsplash	High Backsplash	High Backsplash	High Backsplash
417330-2 (1)	417331-2 (1)	417433-2 (1)	417334-2 (1)
Backsplash Channel	Backsplash Channel	Riser Channel	Backsplash Channel
417252-1 (2)	417252-1 (2)	417341-1 (1)	417252-1 (2)
Heat Shield	Heat Shield	Heat Shield	Heat Shield
417340-1 (1)	417341-1 (1)	417343-1 (1)	417343-1 (1)
#10 Sht. Metal Screw	#10 Sht. Metal Screw	#10 Sht. Metal Screw	#10 Sht. Metal Screw
3.0145-1 (16)	3.0145-1 (16)	3.0145-1 (20)	3.0145-1 (4)
1⁄4-20 x 25⁄16" (58.7 mm) Lg.	1⁄4-20 x 25⁄16" (58.7 mm) Lg.	1⁄4-20 x 25⁄16" (58.7 mm) Lg.	1⁄4-20 x 25⁄16" (58.7 mm) Lg.
Machine Screw (4)	Machine Screw (4)	Machine Screw (4)	Machine Screw (6)
Shelf Assembly	Shelf Assembly	Shelf Assembly	Shelf Assembly
417243-G1 (1)	417244-G1 (1)	417246-G1 (1)	417246-G1 (1)

— 10 —