The range must be installed so that the flow of combustion and ventilation air will not be obstructed. Adequate clearance for air openings into the combustion chamber must be provided. Make sure there is an adequate supply of air in the room to allow for combustion of the gas at the burners.
INSTALLATION CODES AND STANDARDS
The range must be installed in accordance with:
In the United States of America
1.State and local codes.
2.National Fuel Gas Code,
In Canada
1.Local Codes.
2.
3.
ASSEMBLY
Ranges Mounted on Casters
NOTICE: When the range is mounted on casters, it must be installed with the casters supplied, a connector (not supplied by
Provide a restraining device or other means to limit movement of the range without depending on the connector and/or any
Should it be necessary to disconnect the restraint, turn off the gas supply before disconnection. Reconnect the restraint before turning the gas supply on and returning the range to its installation position.
CONNECT GAS LINE
STRAIN
RELIEF HERE
Fig. 1
— 6 —
