NAT Configuration
IP Sharing: For the device to work behind NAT enable IP Sharing, STUN or TURN. IP Sharing is simplest and can be used in the scenario where on the network router, one to one static address mapping can be configured.
Global IP Address: Configure here the global or external IP address of the network. Contact your system administrator to get the global IP address.
Note: The router should be statically configured for one to one port mapping of ports in the RTP port range configured on the Network Configuration > Media page and the VoIP Local port configured on the VoIP Configuration page.
Stun: Enable this to use STUN for resolving the bindings.
Primary Server: Enter the IP address of the primary STUN server.
Port: Enter the primary STUN server port in this field.
Default: 3478.
Secondary Server: Enter the IP address of secondary STUN server.
Port: Enter the secondary STUN server port in this field.
Default: 3478.
Username: This specifies the username to use for authentication with a
STUN server.
Password: This specifies the password to use for authentication with a
STUN server.
Note: When STUN is enabled the Registration Timeout option on the VoIP Configuration page should be set to a value smaller than the binding inactivity timeout on the NAT/Router. This way the binding for the SIP local port can be kept alive.
TURN Configuration: This feature will be supported in future release.
| 19 |
