D-Link DIV-140 manual Network Configuration

Network Configuration

IP Mode: Select a method to obtain an IP address from Static, DHCP and PPPoE option. If the Static option is selected, then a user configured IP address, Net Mask, gateway and DNS server addresses would be used. If DHCP or PPPoE is selected, then these values will be obtained using DHCP or PPPoE. Default: Static.

IP Address: This specifies the IP address of the DIV-140. Default: 10.0.0.1

Net Mask: This specifies the net mask of the DIV-140. Default: 255.0.0.0

Gateway: This specifies the gateway of the DIV-140. Default: 10.0.0.1

Primary DNS Server: This specifies the primary DNS Server of the DIV-140. Default: 10.0.0.1

Secondary DNS Server: This specifies the back up DNS Server of the DIV-140. This is used in case the primary DNS server is not responding. Default: 10.0.0.1

PPPoE Username: This username is used in PPPoE mode to authenticate with a

PPP server.

PPPoE Password: This password is used in PPPoE mode to authenticate with a

PPP server.

Idle Timeout: If the PPPoE session is inactive for the time specified in this field then the session will be terminated. Range: 0 to 86400 seconds. Default: 900 seconds.

D-Link DIV-140 User Guide 17