IBM RS/6000 manual Appendix C. Modem Configurations-13

	done
disconnect:	delay 2	# Separate from previous data.
	send "+++"	# Assure command mode.
	delay 2	# Allow mode switching delay.
	send "ATHð\r"	# Set modem switch-hook down
		# (i.e., hang up).
	ignore "ð\r" or "OK\r" timeout 2	# Ignore modem response.
	send "ATEðQ1\r"	# Initialize modem: Echo OFF,
	ignore "ð\r" timeout 1	#	Disable responses.
	done
condin:	send "AT&F\EðEð\r"	# Reset to factory defaults.
		# \Eð=data compression disabled
		# Eð=echo disabled
	ignore "ð\r" or "OK\r\n" timeout 2	# Ignore modem response.
	send "AT#Fð\Q2\r"	# Trellis modulation disabled
		# Retrain with adaptive rate
	expect "ð\r" or "OK\r\n" timeout 2	# Confirm commands successful
	send "ATVðXðSð=2\r"	# Numeric response code
		# AT compatible messages
		# Answer on 2nd ring
	expect "ð\r" timeout 2	# Confirm commands successful.
	done
waitcall:	ignore "2\r" timeout 1	# Ignore first ring.
	expect "2\r" timeout 1ð	# Pick up second ring
		#	or timeout.
	expect "1\r" timeout 6ð	# Expect a connection response.
	done
page:	send "ATD%N,%R\r"	# %N = pager call center number
		# commas=6sec wait time to
		#	enter paging number.
		# %R = return number
	expect "ð\r" or "3\r" timeout 3ð	# Confirm successful command.
	delay 2	# Wait before hanging up.
	send "+++"	# Assure command mode.
	delay 2	# Allow mode switching delay.
	send "ATHð\r"	# Hang up.
	expect "ð\r" timeout 2	# Confirm successful command.
	done
ripo:	send "AT&F\EðEð\r"	# Reset to factory defaults.
		# \Eð=data compression disabled
		# Eð=echo disabled
	ignore "ð\r" or "OK\r\n" timeout 2	# Ignore modem response.
	send "AT#Fð\Q2\r"	# Trellis modulation disabled
		# Retrain with adaptive rate

Appendix C. Modem Configurations-13