Display and Change Diagnostic Test List Service Aid
This service aid provides a way to:
Display the Diagnostic Test List
This selection lists all of the resources tested by the diagnostics.
Add a resource to the Diagnostic Test List
This selection allows resources to be added back to the Diagnostic Test List. The
Diagnostic Test List Menu lists all resources that can be added back to the Diag-
nostic Test List.
Note: Only resources that were previously detected by the diagnostics and
deleted from the Diagnostic Test List are listed. If no resources are available to
be added, then none are listed.
Delete a resource from the Diagnostic Test List
This selection allows resources to be deleted from the Diagnostic Test List. The
Diagnostic Test List Menu lists all resources that can be deleted from the Diag-
nostic Test List.
Note: Only resources that were previously detected by the diagnostics and
have not been deleted from the Diagnostic Test List are listed. If no resources
are available to be deleted, then none are listed.
Display Previous Diagnostic Results Service Aid
Note: This service aid is only available when you load the diagnostics from a disk
drive or from a network.
Each time the diagnostics produce a service request number (SRN) to report a
problem, information about that problem is logged. The service representative can
look at this log to see which SRNs are recorded. This log also records the results of
diagnostic tests that are run in loop mode.
When this service aid is selected, information on the last problem logged is dis-
played. The Page Down and Page Up keys can be used to look at information about
previous problems.
This information is

not

from the error log maintained by the AIX operating system.
This information is stored in the /etc/lpp/diagnostics/data/*.dat file.
7-16 RS/6000 Enterprise Server Model H Series User's Guide