IBM RS/6000 manual Installing Options5-15

6. Disconnect the drive from the connector on the backplane by gra handle on the drive tray and carefully pulling the drive out of the drive in a safe place.

Attention: Handle the disk drive with care as it is very fragile damaged if exposed to shock, ESD, or rough handling.

7.If you are removing another disk drive, return to “Installing Dis Hot-Swap Bays” on page 5-6.

8.If you are installing another disk drive or carrier blank in ba

“Removing Disk Drives from the Hot-Swap Bays” on page 5-12.

9. Go	to Table A-2			on	page A-4		and	update the	drive information; the
to determine			your		next	step.
10. If	you	do	not	have		any	other	procedures	to perform, replace
that	you	removed			earlier.

Chapter 5. Installing Options5-15