something not working electrolux 37
Malfunction |
| Possible cause |
| Solution |
|
|
|
|
|
Unsatisfactory washing |
| ● Too little detergent or |
| ● Increase the detergent |
results: |
| unsuitable detergent has |
| quantity or use another one. |
|
| been used. |
|
|
●Stubborn stains have not ● Use commercial products to
been treated prior to | treat the stubborn stains. |
washing. |
|
● The correct temperature | ● Check if you have selected |
was not selected. | the correct temperature. |
●Excessive laundry load. ● Introduce into the drum less laundry.
The machine vibrates or is |
| ● The transit bolts and |
| ● Check the correct |
noisy: |
| packing have not been |
| installation of the appliance. |
|
| removed. |
|
|
|
| ● The support feet have not |
| ● Check the correct levelling |
|
| been adjusted. |
| of the appliance. |
|
| ● The laundry is not evenly |
| ● Redistribute the laundry. |
|
| distributed in the drum. |
|
|
|
| ● Maybe there is very little |
| ● Load more laundry. |
|
| laundry in the drum. |
|
|
|
|
|
|
|
The machine makes an |
| ● The machine is fitted with a |
unusual noise |
| type of motor which makes |
|
| an unusual noise compared |
|
| with other traditional |
|
| motors. This new motor |
|
| ensures a softer start and |
|
| more even distribution of |
|
| the laundry in the drum |
|
| when spinning, as well as |
|
| increased stability of the |
|
| machine. |
|
|
|
The machine does not dry or does not dry properly
●The drying time or the dryness degree has not been selected
●The water tap is not turned on (E10)
●The drain filter is clogged (E20)
●The machine is overloaded.
●The selected drying programme, time or dryness degree was not suitable for the laundry
●Select the drying time or the dryness degree.
●Open the water tap.
●Clean the drain filter.
●Introduce into the drum less laundry.
●Select the suitable drying programme, time or dryness degree for the laundry.
