12 electrolux use
●Cottons Economy 
(Economia)
●Drying 
(Secado): Cottons 
(Algodón), Synthetics 
(Sintéticos).
The selector dial can be turned either clockwise or anticlockwise. Position O to Reset programme/ Switching OFF of the machine.
At the end of the programme the selector dial must be turned to position O, to switch the machine off.
Attention!
If you turn the programme selector dial to another programme when the machine is working, the red Start/Pause pilot light will flash 3 times and the message Err will appear on the display to indicate a wrong selection. The machine will not perform the new selected programme.
Programme Option buttons
Depending on the programme, different functions can be combined. These must be selected after choosing the desired programme and before depressing the Start/Pause (Inicio/Pausa) button.
When these buttons are pressed, the corresponding pilot lights come on. When they are pressed again, the pilot lights go out.
Select the temperature
90º 
60º 40º 30º
Temp.
Press this button repeatedly to increase or decrease the temperature, if you
want your laundry to be washed at a temperature different from the one proposed by the
Maximum temperatures are 90°C for cottons, 60°C for synthetics and easy iron, 40°C for delicates, wool and handwash, 30°C for silk , while 
corresponds to cold wash.
Select the Spin Speed, No Spin or Rinse Hold option
1200 
900 700
Centrifug.
Press this button repeatedly to change the spin speed, if you want your laundry to be spun at a speed different from the one proposed by the
The relevant light will light up. Maximum speeds are:
●for Cottons: 1200 rpm;
●for Handwash and Wool: 1000 rpm;
●for Synthetics, Easy iron: 900 rpm;
●for Delicates, Silk: 700 rpm.
No Spin 
option eliminates all the spinning phases and increases the number of rinses for some pro- grammes.
Rinse Hold 
: by selecting this option the water of the last rinse is not emptied out to prevent the fabrics from creasing.
When the programme has finished, the Start/Pause button light goes off, the display shows 3 flashing zeros «0.00»
