36 electrolux something not working
Malfunction | Possible cause | Solution |
The machine does not |
| ● The drain hose is squashed | ||
empty and/or does not spin: |
| or kinked.E20 |
| |
|
| ● The drain filter is clogged. | ||
|
| E20 |
| |
|
| ● The option |
| has been |
|
| selected. |
| |
|
| ● The option | has been | |
|
| selected. |
| |
|
| ● The laundry is not evenly | ||
|
| distributed in the drum. | ||
|
|
|
| |
The door will not open: |
| ● The programme is still | ||
|
| running. |
| |
|
| ● The door lock has not been | ||
|
| released. |
| |
|
| ● There is water in the drum. | ||
|
|
| ||
|
|
| ||
No water is visible in the |
| ● Machines based on modern | ||
drum |
| technology operate very | ||
|
| economically using very little | ||
|
| water without affecting | ||
|
| performance. |
| |
|
|
|
|
|
●Check the drain hose connection.
●Clean the drain filter.
●Select the programme Spin
(Centrifugado) or Drain
(Desagüe).
●Select the programme Spin
(Centrifugado) or Drain
(Desagüe).
●Redistribute the laundry.
●Wait the end of washing cycle.
●Wait for some minutes until the door lock is released.
●Select drain or spin programme to empty out the water.
There is water on the floor: ● Too much detergent or | ● Reduce the detergent |
unsuitable detergent | quantity or use another one. |
(creates too much foam) |
|
has been used. |
|
●Check whether there are any leaks from one of the inlet hose fittings. It is not always easy to see this as the water runs down the hose; check to see if it is damp.
●Check the water inlet hose connection.
●The drain hose is damaged.
●The cap on the emergency emptying hose has not been replaced after cleaning the pump.
●Change it with a new one.
●Put the cap back on the emergency emptying hose and place the latter back in its seat..
