6-1-4. Remove the indoor air temperature sensor.
(1)Disconnect the connector CN08 (ROOM 2P) in the control box and remove the indoor air temperature sensor. (Fig. 10)
Indoor air temperature sensor
CN08
Fig.10
6-1-5. Remove the power box and control box.
(1)Remove a screw and remove the terminal cover. (Fig. 11)
(2)Remove the 2 screws and remove the power box cover. (Fig. 11)
(3)Disconnect the power lines (No. 1 and No. 2) / signal line (No. 3) and ground cable from the terminals in the power box. (Fig. 12)
Terminal cover
Screw
Screw
Power box cover
Fig.11
1
2 
3
Ground cable
Terminal
Power lines / Signal line
Fig.12
23
