NAMES OF PARTS
INDOOR UNIT
Air Intakes
Air Outlet!
(4 locations)
Remote Controller
Refrigerant Tubes
OUTDOOR UNIT
Drain Hose
Air Outlet
NOTE
This illustration is based on the external view of a standard model. Consequently, the shape may differ from that of the air conditioner which you have selected.
This air conditioner consists of an indoor unit and an outdoor unit. You can control the air conditioner with the remote controller.
Air Intake | Air from the room is drawn into this section and |
| passes through air filters which remove dust. |
|
|
Air Outlet | Conditioned air is blown out of the air |
| conditioner through the air outlet. |
|
|
Remote | The remote controller controls power ON/OFF, |
Controller | operation mode selection, temperature, fan |
| speed, timer setting, and air sweeping. |
|
|
Refrigerant | The indoor and outdoor units are connected by |
Tubes | copper tubes through which refrigerant gas |
| flows. |
|
|
Drain Hose | Moisture in the room condenses and drains off |
| through this hose. |
|
|
Outdoor | The outdoor unit contains the compressor, fan |
(Condensing) | motor, heat exchanger coil, and other electrical |
Unit | components. |
| |
|
|
UNIT DISPLAY AND OPERATION BUTTON
INDOOR UNIT
OPERATION button
OPERATION lamp
TIMER lamp
HIGH POWER lamp
REMOTE CONTROL receiver
IMPORTANT
Avoid using radio equipment such as mobile phone near (within 4 ft. (1.2 m)) the remote control receiver. Some radio equipment may cause malfunction of the unit.
If the trouble happens, disconnect power and restart the air conditioner after a few minutes.
REMOTE | This section picks up infrared signals from the | |||||
CONTROL | remote controller (transmitter). |
| ||||
receiver |
|
|
|
|
|
|
|
|
|
|
| ||
OPERATION | When the remote controller cannot be used, | |||||
button | pressing this button enables heating and | |||||
| cooling operation. |
|
|
| ||
| Each time this button is pressed, the type of | |||||
| operation conducted is indicated by the | |||||
| changing color of the OPERATION lamp. Press | |||||
| the button and select the lamp color that suits | |||||
| your preference for operation. |
| ||||
| Cooling | Heating | Stop | |||
| operation |
|
| operation |
| |
|
|
|
| (lamp off) | ||
| (green) | (red) | ||||
|
| |||||
|
|
|
|
| ||
OPERATION | This lamp lights when the system is in the | |||||
lamp | continuous AUTO (red or green), HEAT (red), | |||||
| DRY (orange), COOL (green) and FAN (green) | |||||
| mode (but no FAN mode at M of the S/M switch | |||||
| on the remote controller). |
| ||||
| The OPERATION lamp lights up red and orange | |||||
| alternately when the system is defrosting. | |||||
|
|
|
|
| ||
TIMER lamp | This lamp lights when the system is being | |||||
| controlled by the timer. |
| ||||
|
|
|
|
| ||
HIGH POWER | This lamp lights during operation in the HIGH | |||||
lamp | POWER mode. |
|
|
| ||
|
|
|
|
|
|
|
NOTE
The unit’s display lamps are dimmed during operation in the NIGHT SETBACK mode.
4