Panasonic CS-MKE12NB4U, CS-MKE9NB4U, CU-4KE31NBU, CU-4KE24NBU, CU-3KE19NBU, CS-KE18NB4UW Fan Only

FEATURES

This air conditioner is an inverter type unit that automatically adjusts capability as appropriate. Details on these functions are provided below; refer to these descriptions when using the air conditioner.

• Microprocessor Controlled Operation

The interior compartment of the remote controller contains several features to facilitate automatic operation, easy logically displayed for easy use.

• Simple One-touch Remote Controller

The remote controller has several features to facilitate automatic operation.

• 24-Hour ON or OFF Timer

This timer can be set to automatically turn the unit on or off at any time within a 24 hour period.

• 1-Hour OFF Timer

This timer can be set to automatically turn off the unit at any time after one hour.

• Night Setback

This function saves energy by controlling operation to provide a quieter operating sound than normal.

•Automatic and 3-step Fan Speed

Auto/High/Medium/Low

•Air Sweep Control

This function moves a flap up and down in the air outlet, directing air in a sweeping motion around the room and providing comfort in every corner.

• Auto. Flap Control

This automatically sets the flap to the optimum position during heating, cooling, and drying operation.

CONTENTS
		Page
FEATURES		2
PRODUCT INFORMATION		2
SAFETY PRECAUTIONS		2
INSTALLATION LOCATION		3
ELECTRICAL REQUIREMENTS		3
SAFETY INSTRUCTIONS		3
NAMES OF PARTS		4
USING THE REMOTE CONTROLLER		8
OPERATION WITH THE REMOTE CONTROLLER		9
1.	Automatic Operation	9
2.	Manual Operation	9
3.	Adjusting the Fan Speed	10
4.	Fan Only	10
5.	Night Setback Mode	10
6. HIGH POWER Mode		10

•Automatic Switching between Cooling and Heating When the remote controller’s S/M switch is at the “S” (Single) position

This unit automatically switches between cooling operation and heating operation according to the difference between the room temperature and the temperature setting.

When the remote controller’s S/M switch is at the “M” (Multiple) position

Unlike when the switch is at the “S” position as described above, the function for automatically switching between cooling and heating does not work. Then, the air conditioner continuously operates under the mode selected at initial operation.

•Hot Start Heating System

Right from the start, the air is warm and comfortable. This system prevents any cold blasts at the beginning while the heat pump is warming up, or even defrosting.

• Automatic Restart Function for Power Failure

Even when power failure occurs, preset programmed operation can be reactivated once power resumes.

• High Power Operation

If not in Auto Operation, the unit operates at maximum output for 30 minutes, regardless of the desired temperature.

The fan speed is 1 step above “High”.

Page
SPECIAL REMARKS	11
SETTING THE TIMER	11
USING THE 1-HOUR OFF TIMER	13
TIPS FOR ENERGY SAVING	13
ADJUSTING THE AIRFLOW DIRECTION	13
OPERATION WITHOUT THE REMOTE CONTROLLER	14
CARE AND CLEANING	14
TROUBLESHOOTING (BEFORE CALLING FOR SERVICE) ..	16
OPERATING RANGE	16
WIRED REMOTE CONTROLLER	16
SPECIFICATIONS	17

PRODUCT INFORMATION

If you have problems or questions concerning your Air Conditioner, you will need the following information. Model and serial numbers are on the nameplate on the bottom of the cabinet.

Model No. __________________________________

Serial No. ___________________________________

Date of purchase _____________________________

Dealer’s address _____________________________

Phone number _______________________________

SAFETY PRECAUTIONS

The following symbols used in this manual, alert you to potentially dangerous conditions to users, service personnel or the appliance:

This symbol refers to a hazard or unsafe practice which can result in severe personal injury or death.

This symbol refers to a hazard or unsafe CAUTION practice which can result in personal

injury or product or property damage.

2