IBM RS/6000 manual Console Mirroring, System Configuration

Console Mirroring

Console mirroring allows a person on a local ASCII terminal to monitor the Ser Processor activities of a remote user. Console mirroring ends when the Serv Processor releases control of the serial ports to the system firmware.

System Configuration:

ŸService Processor

Ÿ Modem connected to one serial port and enabled for incoming calls

Ÿ Local	ASCII terminal connected to	the other serial port. This	local	termi
be	connected directly to your	server or connected through	another	mod

There are two scenarios in which console mirroring can be invoked:

1. Remote session first, then local session added:

a. Remote session already in progress

b. Remote user uses the Service Processor menus to enable console mirr allowing both consoles to be active

2. Local session first, then remote session added:

a. Local session is already in progress

b. The Service Processor receives a call from the remote user

c. The local user selects the option to enable console mirroring. The Se Processor immediately begins mirroring Service Processor menus

Note: A quick disconnect is accomplished by hitting the key sequence Ctrl+ either console. Both sessions will exit the Service Processor menus.

3-30RS/6000 Enterprise Server Model H Series User's Guide