IBM RS/6000 manual Cleaning the Mouse

Cleaning the Mouse

1.Remove the retaining ring by turning it counterclockwise, in the direct arrow as shown in the illustration.

Retaining Ring

Ball

Cavity

2. Remove the ball.

3. Inspect the ball for contaminants. Wipe it clean with a dry, lint-free

4.If the ball is dirty, wash it in warm, soapy water. Rinse and wipe lint-free cloth until dry.

5.Inspect the ball cavity in the mouse for foreign materials. If there materials, remove them.

6.Replace the ball.

7.	Replace		the retaining ring on the mouse		and align it	with	the open slo
	ball	cavity.
8.	Turn	the	retaining	ring clockwise until the	open slots	are	covered and
	the	ring	snap into	place.

2-10RS/6000 Enterprise Server Model H Series User's Guide